Acer AM778 Manual - Página 19

Navegue en línea o descargue pdf Manual para Monitor Acer AM778. Acer AM778 44 páginas. Tft lcd monitor

Imprimir página

2.7 POWER SUPPLY

2.7.1
input Voltage Range
The monitor shall operate within specification over the range of 90 to 265 VAC power supply.
2.7.2
Input Frequency Range
Input power frequency range shall be from 47.5 to 63 Hz over the specified input
voltage range.
2.7.3
Quick specification review
•
Input current
•
Inrush current @ cold start
•
Output
Output Volt
•
Total output power:
•
Withstanding voltage :
•
Leakage current :
•
Efficiency :
2.7.4
Power Management
2.7.4.1 Meet VESA DPMS proposal
The monitor must comply with the Microsoft On Now specification, with a minimum of three power
management states, as defined by the VESA DPMS document. The front panel of the monitor must
appropriately display the DPMS state, For example:
DPMS ON :
DPMS OFF :
2.7.5
Power Consumption
On mode
Off mode
DC power off
Power SW off
disconnection
Power saving states are measured with speakers attached but not worked.
The recovery time from stand by /suspend/off mode to on mode is 3 seconds maximun.
1.2A (max) at 90VAC input and full load ,
0.6A (max) at 264 VAC input and full load.
30A(0-peak)@ 110Vac ,50A(0-peak) @ 220Vac
(measured when switched off for at least 10 mins.)
Tolerance
+5Vdc
±5%
+5Vdc
±5%
+12Vdc
±5%
The power LED is Green
The power LED is Amber
Output Current
-
MIN
0A
0.05A
0A
48 Watt max.
1.5Kvac or 2.2KVdc for 1 minute.
< 0.25mA/100Vac , <3.5mA/230Vac
80% min. @115V/230VAC, maximum load.
48 Wmax
4 Wmax
4 Wmax
1 Wmax
4 Wmax
19
Volt Tolerance
MAX
1.0A
4.8~5.2V dc
1.5A
4.8~5.2V dc
2.2A
11.4~12.6Vdc
Green
Amber
Dark
Dark
Dark (DC power off)
Amber (DC power on)