Aktobis WDH-180DS Manual - Página 7

Navegue en línea o descargue pdf Manual para Calentador Aktobis WDH-180DS. Aktobis WDH-180DS 13 páginas. Radiant heater

1.6.

Then use them to mount the two bracket arms (6) directly on the heating head. Please do not tighten the

Allen screws yet, so that it is still possible to move the bracket arms.

1.7.

Now connect/assemble the bracket fork (4) to the bracket arms (6) on the inside. Use the two fastening

screws (axle) (8) for each. Make sure that the holder arms are attached to the holder fork from the outside.

Now tighten the four Allen screws on the heating head so that the bracket sits in the centre of the heating

head and can no longer slip !

1.8.

Now attach the four suspension screws (3) to the outside of the bracket fork (4). Leave enough space for

the screw head so that it can be hooked into the wall bracket (1) without any problems!

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de