Aktobis WDH-BGP10S Manual de inicio rápido - Página 7
Navegue en línea o descargue pdf Manual de inicio rápido para Calentador Aktobis WDH-BGP10S. Aktobis WDH-BGP10S 8 páginas. Power heater with hose connection
Imprimir página
Troubleshooting
The fan heater only provides "lukewarm" performance
The outlet temperature depends on the inlet temperature. As a rule, this is approx. 15-20°C above the inlet
temperature and the room is heated by the fact that the room air is constantly circulated, as with a normal radiator,
and the associated repeated heating (heating progression).
Should you use the power heater in a very cold room, e.g. in a garage with 5°C or even colder, then it would be
normal if the outlet temperature is only "lukewarm", because the electric heater can of course not heat this air to
"hot" in the short time in which the air passes the heating rods. This would only be achievable with a switched-off
fan, but the air would then firstly not be distributed evenly in the room and secondly the unit would lose a lot of its
overall heating effectiveness.
Our devices are regularly tested for quality and effectiveness and cannot be compared with conventional bath
heaters, which only have a thin heating wire and usually no integrated fan.
Other
Warranty statement:
Notwithstanding the statutory warranty claims, the manufacturer grants a warranty in accordance with the laws of
your country, but at least 1 year (in Germany 2 years for private individuals). The warranty begins on the date of
sale of the appliance to the end user.
The warranty only covers defects that are due to material or manufacturing faults.
are.
Warranty repairs may only be carried out by an authorised customer service. To
To make your warranty claim, please enclose the original sales receipt (with date of sale).
Excluded from the guarantee are:
-
Normal wear
-
Improper applications, such as overloading the appliance or non-approved accessories.
-
Damage due to external influences, use of force or foreign objects
-
Damage caused by non-observance of the operating instructions, e.g. connection to the wrong mains voltage
or non-observance of the installation instructions.
-
Completely or partially dismantled units
Conformity:
The E-Heater has been tested and itself and/or parts thereof have been manufactured under the following (safety)
standards:
Tested by TÜV Rheinland "GS" and of course with CE (LVD + EMC) conformity.
Tested safety according to:
CE (LVD) Conformity tested according to:
CE (EMC) conformity tested according to:
EN 62233:2008
EN 60335-2-30:2009+A11
EN 60335-1:2012+A11
EN 60335-2-30:2009+A11
EN 60335-1:2012+A11
EN 62233:2008
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: [email protected]