Aktobis AG WDH-E20 Manual - Página 6

Navegue en línea o descargue pdf Manual para Calentador Aktobis AG WDH-E20. Aktobis AG WDH-E20 10 páginas.

Note: A short fan run-on may occur at high temperatures. When the internal thermostat

or the heating coil has cooled down sufficiently, the fan also switches off immediately.

1.5. If you want to activate/use the timer function (function for determining the remaining

running time or function for specifying a start time), press the TIMER buttons.

Determining the remaining running time:

Press the "Minus" TIMER button during operation

to set the desired remaining running time of the dehumidifier. (A value between 0.5 -

24 hours can be selected in 30-minute increments). After this selected operating time

has elapsed, the appliance switches off completely.

Determining a start time:

Press the "Plus" TIMER button during operation to select the desired start time. (A

value between 0.5 - 24 hours can be selected in 30-minute increments). After the

setting, the appliance switches off the heating function and after the selected duration

has elapsed, the appliance switches the heating function on automatically (with the

last settings used).

1.6. With the oscillation button, you can also optionally rotate your heater.

activate. Press the oscillation button again to stop the rotation.

Note: The heater automatically returns to the starting position when you switch off the

oscillator function or switch off the appliance.

1.7. You can also control all the settings and functions of your fan heater with the remote

control included in the scope of delivery.

The remote control requires a (CR2025) button cell battery (not included)!

Switch off

Press the On / Off button to switch off. The appliance continues to run for a few seconds to

cool down (without heating function) before it switches off completely.

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de