1100 Energy SBP-1100e Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Batería 1100 Energy SBP-1100e. 1100 Energy SBP-1100e 17 páginas. Smart battery power system
Imprimir páginaSBP-1100e Features
• External dimensions approx. 15" L x 11" W x 6 .5" H, including receptacles with carrying handle folded.
• Fits within a space 16" L x 12" W x 7" H, but 12" additional length should be allowed for cable bends.
• Integrated battery monitor panel reports condition and state-of-charge percentage.
• Can be recharged more than 400 times, typically.
• Durable, rugged, water resistant, and crush resistant case; airtight (with pressure relief valve)
• 100% depth of discharge allowed, versus 30% to 60% for lead-acid storage battery technologies.
• Light weight — a third of the size and weight of comparable sealed lead acid packs with casing and venting.
• Deep discharge WITHOUT damage, no urgency to re-charge.
• Automatic shut-down at full discharge with preceding user notifications.
• Rapid charging — 10 hrs to full charge from empty, using AC power adapter: SBP-AC-ADAPTER-24V-130W
• Integrated battery pack protection circuitry for safety.
• Partial charge/discharge cycles OK, no memory effects.
• Cells do not out-gas, environmentally benign compared to lead or nickel-cadmium chemistries.
SBP-1100e Specifications
Standard Output Voltages (factory-set)
Other Output Voltages (examples)
Custom Output Voltages
Input (Charging) Voltage
Input (Charging) Power
Energy Storage Capacity (10 hr. discharge)
Amp-hour Storage Capacity (10 hr. discharge)
Temperature Range for charging
Temperature Range for discharging
Temperature Range for storage
Max. Continuous Discharge Load
(less than 1 hour, at 25 deg. C, 77 deg. F)
Max. Continuous Discharge Load
(more than 1 hour, at 25 deg. C, 77 deg. F)
Charge/discharge Cycle Life
Service Life
Weight
Recharge time from empty
Output Noise and Ripple
Power Input Receptacle
Power Input Mating Plug
Power Output Receptacle
Power Output Mating Plug
Serial Data Receptacle
Serial Data Mating Plug
13.8 volts DC, +/- 4%, for nominal 12-volt applications, 25.3 volts DC, +/- 4%, for nominal 24-volt applications
6, 9, 12.4, 16, 24, or 28 volts DC, +/-4 %, factory-set
Fixed voltages from 6 to 28 volts DC, +/- 4%, factory-set
10 to 28 volts DC, continuous (filtered or low-ripple) Use an approved power source
up to 200 watts, in increments of 50 watts.
1100 watt-hours, initial capacity, 1000 watt-hours available for output
72 Amp-hours (13.8 volt model), 40 Amp-hours (25.3 volt model)
0˚to 40˚C (32 deg. F to 104 deg. F)
-20˚to 50˚C (-4 deg. F to 122 deg. F)
-20˚to 60˚C (-4 deg. F to 140 deg. F)
25.3 volts: 300 watts
13.8 volts: 280 watts
9 volts: 180 watts
6 volts: 120 watts
25.3 volts: 200 watts
13.8 volts: 180 watts
9 volts: 120 watts
6 volts: 80 watts
more than 400 cycles, typical (20% reduced capacity after 300 discharge cycles)
about 5 years, typical, for 20% reduced capacity due to aging. Batteries age faster at higher storage temperatures and at higher
storage state-of-charge.
approx. 28.5 lbs.
8 to 10 hours, using the 130 watt SBP AC adapter (SBP-AC-ADAPTER-24V-130W). Consult 1100 Energy for other charging options
100 mV peak-to-peak at maximum load, for 25.3 volts DC output. Noise and ripple are proportionate to loading.
MS3112E14-5P, 5-pin contact male MIL receptacle, box mount
MS3116F14-5S, 5-socket contact female MIL plug, cable-mount, with strain-relief clamp. (Plug is available from 1100 Energy as item
no. SBP-CON-INPUT)
MS3112E14-5S, 5-socket contact female MIL receptacle, box mount
MS3116F14-5P, 5-pin contact male MIL plug, cable-mount, with strain-relief clamp. (Plug is available from 1100 Energy as item no.
SBP-CON-OUTPUT)
MS3112E10-6P 6-pin contact male MIL receptacle, box mount
MS3116F10-6S 6-socket contact female MIL plug, cable-mount, with strain-relief clamp. (Plug is available from 1100 Energy as item
no. SBP-CON-DATA)
| 1