American Recorder AllCast MULTI-FUNCTION MONITOR STAND Manual - Página 4

Navegue en línea o descargue pdf Manual para Bastidores y soportes American Recorder AllCast MULTI-FUNCTION MONITOR STAND. American Recorder AllCast MULTI-FUNCTION MONITOR STAND 8 páginas.

Imprimir página
IMPORTANT NOTE: The ALLCAST Multi-Functional Monitor Stand includes three mounting options that will
accomodate most types of desk, tabletops and workstation. The mounting options are CLAMP MOUNT
(STEP 2), GROMMET MOUNT (STEP 3) and WEIGHTED BASE (STEP 4). No matter which mounting
method you choose, make certain that your desk, tabletop or workstation is in proper working order and will
adequately support the stand with attached devises. Once you decide on a mount and location, confirm that
the microphone extension arm will have clearance to extend and retract. Remember to save all unused
parts for future use.
STEP 2
STEP 2a -Install CLAMP "L" BRACKET to pole with (3) M5x14 screws. Tighten with 3mm Allen Wrench Key
STEP 2b -Adjust CLAMP MOUNT
for thickness of desk/tabletop
L BRACKET
45mm
(1.75")
SCREW
CLAMP
SCREW
CLAMP
STEP 3
STEP 3a -Install & tighten GROMMET BASE
to pole with (3) M5x14 pole screws. Tighten with 3mm
Allen Wrench Key
ALLCAST MULTI STAND OWNERS MANUAL ver2.0
Saturday, February 20, 2021 3:05:43 PM
For Clamp Mounting
STEP 2c -Attach L BRACKET to the
SCREW CLAMP with (2) M8x10 screws. Tighten
with 5mm Allen Wrench Key
L BRACKET
80mm
(3.60")
For Grommet Mounting
STEP 3b - Disassemble CLAMP MOUNT - remove
phillips head screw from CLAMP PLATE and
unscrew and remove THREAD KNOB
PHILLIPS HEAD SCREW
PHILLIPS HEAD SCREWDRIVER
REQUIRED (not included)
STEP 2d -Secure CLAMP MOUNT to
desk, tabletop or workstation
POLE
L BRACKET
SCREW
CLAMP
CLAMP PLATE
THREAD
KNOB
4
STEP 3c - Place THREAD KNOB with washers and
BOTTOM PLATE through desktop, fasten to pole with
GROMMET PLATE
POLE
GROMMET PLATE
TOP
DESK/TABLETOP
BOTTOM PLATE
100
95
75
25
5
0