123Filter iSpring Instrucciones de instalación - Página 5
Navegue en línea o descargue pdf Instrucciones de instalación para Sistemas de filtración de agua 123Filter iSpring. 123Filter iSpring 15 páginas. Reverse osmosis water filter systems
También para 123Filter iSpring: Manual del usuario (9 páginas)
Imprimir página
Installation Tips
How to use Quick-Connect fitting
To connect:
1. See Figure 1. Check and cut the tubing end squarely and cleanly with utility knife or scissors.
2. Make a mark at the end of tubing. The lengh is about ½ inch, the depth of the fitting body.
3. Fully insert the tubing until the mark is about to disappear. This ensures that it is sealed by the
O-ring near the bottom.
To disconnect:
1. See Figure 2 and 3. Remove the blue Lock Clip.
2. With two fingers PUSHING IN and PRESSING DOWN the Lock Sleeve to eliminate the
Gap that the blue Lock Clip occupied, pull the tubing out. (Pressing down the Lock Sleeve
releases the spring-loaded steel teeth that grab the tubing inside the fitting body).
www.123filter.com
Figure 2
| (678) 261-7611
Figure 1
Figure 3
Page 4