Akura AHH260LCD Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para TV LCD Akura AHH260LCD. Akura AHH260LCD 17 páginas. Lcd tv / monitor

system changes as follows:

AUTO °˙ PAL °˙ NTSC °˙NTSC4°˙ SECAM °˙ AUTO

°§SOUND SYSTEM£∫Sound system setup. Press [V+]/[V-],

system changes as follows:

DK °˙ BG °˙ DK

°§ SKIP£∫When it is OFF, the present program could be skipped; if it is ON, skip is not available, but it could

be achieved through [-/--] and [0]~[9], and program No. is red.

°§ AUTO SEARCH£∫Press [V+] to start auto search. In the process of searching, press [V-] or [MENU] to quit

search and to stay at program 0.

°§ SEARCH£∫Press [V+] to start manual search backward. And press [V-] to search forward. The first program

will be the present program (given a program number); press [MENU] in the searching process to stop searching.

If there is no program searched, then it will stop at blue back.

°§ FINE TUNE£∫Press [V-]/[V+] for fine tuning.

6. EXCHANGE

°§ EXCHANGE£∫Press [V-]/[V+] to enter EXCHANGE:

PROGRAM is the present No., and press [V+]/[V-] to switch,

or press [-/--] and [0]~[9] to find the relevant program.

Next PROGRAM is the exchange no., which could be

achieved through [V+]/[V-] or [-/--] and [0]~[9] to

find the relevant program. Press [V+]/[V-] in EXCHANGE

to confirm exchange, or quit by pressing [MENU].

Menu Operation in VGA State.

1. When system signal source switch to VGA, there will be a PC mark in the up-left corner of the screen.

2. In the state of VGA, if there is no signal, or the signal exceeds the supported range, there will be a mark of no

signal showing out.

3£ÆIn VGA input, main menu operation in VGA. Menu is as in the picture.

Item: To adjust screen brightness.

Item: To adjust screen contrast.

1 3