AMERICAN SPECIALTIES EZ FILL 0394-1AC Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Dispensador AMERICAN SPECIALTIES EZ FILL 0394-1AC. AMERICAN SPECIALTIES EZ FILL 0394-1AC 2 páginas. Vanity mounted automatic foam soap dispenser
Imprimir páginaEZ FILL™ VANITY MOUNTED AUTOMATIC FOAM SOAP DISPENSER (Pg 2 of 2)
INSTALLATION
Install spout and sensor housing to vanity deck with anti-rotation kit escutcheon flange, rubber washers and basin nut
(supplied) through 1-1/8" Dia [Ø28,5] mounting hole and 5/32" Dia [Ø4] adjacent hole for anti-rotation pin of escutcheon
flange. Connect flex tubing from soap dispenser head to fitting on top of foam compressor. Connect com plug from
dispenser head to com socket from foam compressor. Mount pump assembly with wall bracket to convenient structure under
vanity within 24" [610] of L-fitting on foam compressor bottom with two (2) screws and wall anchors (supplied). Connect
flex tubing from L-fitting on air compressor to fitting on top of pump assembly. Connect com plug from foam compressor to
com socket from pump assembly. Mount battery compartment in convenient location under vanity deck with two (2) screws
and wall anchors (supplied) within easy reach of extension cable length and plug connector into mating inline power
connector. Install six (6) 'D'-size 1.5V cells (supplied by others) in under-deck battery compartment according to polarity
indication, plug battery cable jack into battery box socket in cover handle and screw lock cover. Alternatively, plug AC
Adapter into GFCI power outlet located under vanity within 13.5 ft (412 cm) of pump assembly and plug connector into
mating inline power connector. See OM & IG provided in box with unit for complete installation details.
OPERATION
System shall operate each time an object is positioned within the sensing range of 1-3/16" [30] to 3-15/16" [100] ± 3/8" [10]
directly in front of the spout of the dispenser. A stream of foam soap will be pumped from the nozzle during each activation.
Optional remote control unit Model № 0393-R (supplied {one (1) per six (6) pack} or order separately) will allow owner
programming of alternate dispense amounts and simplify priming when refilling soap container for initial setup and soap-out
conditions. See Model № 0393-R TDS and Owner's Manual for complete description of functions. Unit will dispense foam
soap while batteries are at suitable charge level (or AC adapter is connected) and correct viscosity soap is present in the tank
and system is correctly maintained to enable dispensing (LED is not flashing continuously or does not remain dark when
trigger attempt is made). LED will display flash for sensing and continuous flashing for low battery condition (if AC
Adapter is not utilized). Manual priming fill button on pump runs motor (or use 0390-R) for easy soap priming. Soap is
manually replenished and batteries are replaced on service interval determined by maintenance schedule. See OM & IG for
complete description of Features and Operations.
№
Model
Suffix
1A
1A-41
1AC
1AC-41
3AC
3AC-41
6-1A
6-1A-41
6-1AC
6-1AC-41
6-3AC
6-3AC-41
AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
(914) 476.9000 • (914) 476.0688
www.americanspecialties.com
Schedule of Model
Service Application
Universal Model, Battery Operation Bright Chrome Plated Finish
Universal Model, Battery Operation Matte Black Finish
USA/UK/EU AC Adapter Operation Bright Chrome Plated Finish
USA/UK/EU AC Adapter Operation Matte Black Finish
AU Model, AC Adapter Operation Bright Chrome Plated Finish
AU Model, AC Adapter Operation Matte Black Finish
Universal Model, Battery Operation, Six Pack Bright Chrome plated Finish
Universal Model, Battery Operation, Six Pack Matte Black Finish
USA/UK/EU AC Adapter Operation, Six Pack Bright Chrome Plated Finish
USA/UK/EU AC Adapter Operation, Six Pack Matte Black Finish
AU Model, AC Adapter Operation, Six Pack Bright Chrome Plated Finish
AU Model, AC Adapter Operation, Six Pack Matte Black Finish
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
№
Suffix Codes and Application
MODEL №:
ISSUED:
REVISED:
0394-(n)
06-16
13 FEB 2020