Bobot WIN SPIDER Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Limpiador ultrasónico de joyas Bobot WIN SPIDER. Bobot WIN SPIDER 8 páginas. Window cleaner

Imprimir página
Note: frameless glass and laminated
glass should be used with caution
Use frameless glass with care
The sensor can't tell the edge
Use the product
The number of window cleaning depends on the glass's own turbidity may
need to be wiped several times to clean!
IPlug in the safety lock into hole, turn it in clockwise
till indicator light changed to Green.
NOTE: Please start to use the robot ONLY when the
safety lock indicator light is in Green.
Secure the other end of the safety rope to other
objects in the room to ensure the fastening does
not fall off.
machine outside window cleaning may have the
risk of falling! Special attention!
9
Frosted glass is not suitable

Product Maintenance

1.
Use the Product
A.
Press power button for 2
B.
Place your BOBOT WIN SPIDER
secondes to turn on your
on glass, press again the power
BOBOT WIN SPIDER.
button to start.
Caution: Before starting, make sure the edge of BOBOT WIN SPIDER
is 8cm or more away from window frames or corners
.
Stop/Pause
A.
During the cleaning process,
B.
During the cleaning process,
press the power button or the
press the Pause key to Pause.
STOP button on the remote
control to STOP the cleaning.
2.
Wash Cleaning Pad
Clean Fan
1
2
Put your BOBOT WIN SPIDER
Put your BOBOT WIN SPIDER
up-side-down, take off the
up-side-down, use a clean and
cleaning pad and put it into cold
dry cloth to wipe out dirt/debris
water, wash the cleaning
on the fan.
pad with detergent and dry
it for reuse.
Note: wet cleaning pad is not
suggested to be used as it may get
your robot stuck when cleaning glass
with heavy dirty.
Beware of the risk of electric shock!
Make sure the power is completely disconnected and the machine is turned off before cleaning or maintaining the machine.
Do not drag the power plug through the extension cord, the power should be properly unplugged.
Do not repair the product by yourself. Product maintenance must be carried out by an authorized after-sales service center or
distributor.
Do not continue to use the machine if the power supply is damaged.
If the machine is damaged, please contact the local after-sales service center or dealer for repair.
Do not wash the body and the power adapter with water.
Do not use this product in wet, water or other liquid situations, so as not to cause machine failure or electric shock.
Never damage or twist the power cord. Do not place heavy weights on the power cord or adapters to avoid damage to the power cord,
If the supply cord is damaged, it must be replaced with a special cord or a special component purchased from the manufacturer or
repair department.
C.
You can also start it from your
remote control "START" button.
C.
You can also press the "START"
button on the remote control to
START again.
Clean Edge Sensors
Cleaning Driving Treads
3
4
Put your BOBOT WIN SPIDER
Put your BOBOT WIN SPIDER
up-side-down, use a clean
up-side-down, use a clean
and dry cloth to wipe out
and dry cloth to wipe out
dirt/debris on the sensors.
dirt/debris on it.
10