BOBPERRY AUDIO Ducker Pro 2 Manual - Página 4

Navegue en línea o descargue pdf Manual para Monitor BOBPERRY AUDIO Ducker Pro 2. BOBPERRY AUDIO Ducker Pro 2 18 páginas.

HYSTERESIS

Sets the Hysteresis Threshold. While "Threshold" is the threshold for the "beginning" of the

Ducking process, "Hysteresis" is the threshold for the "end" of the Ducking process.

This means that, when your Aux signal has surpassed the Threshold and the Ducker is

ducking, it will remain ducked, even if the signal does not surpass the Threshold any more,

until the Hysteresis threshold is reached. Only then will the release phase kick in.

When setting a Hysteresis value, the HOLD function will be disabled by default.

ALLOW HYSTERESIS+HOLD

Right-click the HYSTERESIS dial for a context menu. Select "Allow Hysteresis+Hold" if

you want to use Hysteresis in conjunction with an additional HOLD time.

REDUCTION

Sets the gain reduction or boost in dB. Negative values result in gain reduction, positive

values result in boost. For subtle effects we recommend using a range of up to ±3dB. For

pumping club / house music sound go down to -10dB.

Use boost for special effects – it's all up to your creativity.

CURVE

The CURVE switch lets you choose between linear (LIN), logarithmic (LOG) and S-CURVE

volume curves for attack and release of the ducking process. The decision which one to take

will solely be based on your signal and personal taste.

AUX SRC

Select the source for your Aux Signal with the AUX SRC switch.

When working without a side chain, select MAIN.

For normal side chain behaviour, select S/C.

If you want your Main signal to trigger the start of the ducking phase, but you want your Aux

signal to trigger the ending of the ducking phase, select MAIN ATTACK, S/C RELEASE.

You can invert the special mode by enabling S/C ATTACK, MAIN RELEASE in the ADVANCED

CONTROLS drawer.

VST is a software and trademark of Steinberg Media Technologies GmbH.

Bob Perry Ducker Pro 2 – Manual – Page 4/18

20210113160816