EURO-Jabelmann V 4000K Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Accesorios EURO-Jabelmann V 4000K. EURO-Jabelmann V 4000K 11 páginas.

7. Assembly and Start-Up

7.1. Assembly of the Machine

Place the machine on a flat and even surface and

the feet to the desired height. The front and back feet must be the same height. Check the screw joints for

tightness.

Before connecting to the electric circuit, check whether the energy grid corresponds with the specification

on the motor's rating plate.

7.2 Starting Up the Machine

Set the desired discharge height for the feed belt using a winch (photo). Ensure that the belt is always sta-

ble.

Insert the 16 Ampere plug into a suitable socket and switch the belt on using the switch (photo 4).

When starting the machine up, ensure that the belt is running in the right direction.

If the belt is rotating in the wrong direction, the

rotation direction of the motor is to be reconnected on the mains plug.

This is to be done by trained professionals only!

After the belt has started, you can pour the material that is to be transported into the hopper.

Before you finishing working with the machine, it is important that you let the belt run empty and that no

material remains on the belt.

Should the motor circuit breaker trip, this is probably the result of you having put too much material into

the machine.

Reduce the quantity if this happens.

IMPORTANT

Switch off the motor and disconnect from the mains

before any repair or maintenance work is carried out.

8.1. Maintenance and Lubrication

The lubricating points on the bearings are to be lubricated

regularly. This is regardless of how often the machine is used. Switch off the machine and disconnect from

the mains before lubricating the machine.

8.2. Repair work

IMPORTANT

Repair work is only to be carried out by

trained professionals!

8.3. Tension the conveyor belt

Should the belt pull on the protective plates at the side, it is useful to tension the belt.

In addition to this, the thread alignment can be easily

changed.