Canon AE-1 Primeros pasos - Página 2

Navegue en línea o descargue pdf Primeros pasos para Cámara digital Canon AE-1. Canon AE-1 2 páginas.
También para Canon AE-1: Manual de instrucciones (22 páginas), Manual de procedimientos de instalación (48 páginas), Manual (42 páginas), Manual (12 páginas), Manual de instrucciones (22 páginas)

How to Load the Film

It is important to load the film correctly to avoid time comsuming

re-shoots. Follow these steps. Avoid direct sunlight when loading or

unloading film.

Open the Back Cover

Pull up the rewind crank and the back cover will pop open. The back

cover can be securely closed by simply pressing it until it locks.

Next, Place the cartridge into the film cartidge chamber and press

down while rotating the rewind knob until it drops securely into posi-

tion. The protuding part of the cartridge should be on the bottom. Pull

the film leader across and insert the end into one slot of the the take-

up spool. Turn the film advance lever and wind the film around the

take-up spool making sure that the perforations of the film are

engaged in the teeth of the film transport sprocket.

Rewind Crank

Film Cartidge Chamber

Page 2

Then, make sure there is no film slack. In case there is, gently turn the

film rewind crank in the direction of the arrow to obtain proper film

tautness. Crank the film advance lever to ensure that the film leader is

wound fully on to the take-up spool before closing the camera back.

Rewind Crank

Close the back cover until it snaps shut. Gently turn the film rewind

crank in the direction of the arrow to take up any remaing slack. Then,

advance the film a couple of times presssing the shutter button until

the first exposure appears in the frame counter. TIP: Watch the film

rewind knob as you advance the film. If it rotates, the film is properly

loaded. If it doesn't, open the back cover and load the film again from

the start.

Take-Up Spool

Page 3