Euro-Pro EP621HR Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Aspiradora Euro-Pro EP621HR. Euro-Pro EP621HR 6 páginas. Lightweight upright vacuum

Imprimir página

OPERATING INSTRUCTIONS

WINDING & UNWINDING THE

POWER CORD

This vacuum cleaner is

equipped with a convenient

cord storage feature. The

power cord winds around

the two cord holders at

the back of the unit. The

top one has a quick

cord release feature.

Turn the cord hook to

the left or the right to

remove the power cord.

Fig. 4

(Fig. 4)

When using the vacuum,

attach the power cord to

the cord holder so that

the power cord is out of

the way when you

are vacuuming.

(Fig. 5)

Cord holder

Fig. 5

ON/OFF SWITCH

The On/Off switch has three different

positions. (Fig.6)

• Push on the "I" side to turn the

vacuum ON. Set the vacuum here

when using the removable hose

handle with the accessories or when

vacuuming bare floors.

• Push on the "II" side to turn the

motorized floor brush on.

• Push on the "O" side to turn the

vacuum to the OFF position.

= OFF

= ON

(Bare Floors/Tools)

= ON

(Carpet)

Fig. 6

USING THE UNIT With the

Motorized Floor Brush

• Unwind the power cord

and plug into the

120V outlet.

• Press the On/Off switch to

the "II" position so that

both the vacuum

and the motorized

floor brush is

turned "ON"

NOTE:

When vacuuming

deep pile carpets or

hard wood floors,

lower the angle

of the handle

for easier

maneuverability.

(Fig. 7)

Fig. 7

USING THE UNIT WITH THE

ACCESSORIES

• Remove the removable

hose handle from

the hose connector.

• Attach the extension

tube, crevice tool or

the dusting brush

to the end of the

hose. (Fig. 8)

Fig. 8

MANUAL VARIABLE SUCTION

CONTROL

Your vacuum cleaner includes a

variable suction control valve on the

hose extension. The suction power can

be adjusted by moving the slide to the

desired position. For example. Less

suction is required on upholstery and

draperies compared to thick shag

carpets, which require maximum

suction.

Extension Tube

For hard to reach places. Use with

crevice tool or with dusting brush.

Crevice Tool

For radiators, crevices, corners,

baseboards and between cushions.

Lower

Dusting Brush

The dusting brush is used

for the furniture, venetian

blinds, books, lamp shades

and shelves.

Intelli-Sense

Filter Monitor

When the Intelli-Sense

Monitor lights up, it means that the

dust cup is full or the HEPA filter,

filter ring or Debris Screen needs

cleaning. You must empty the dust

from the dust cup and clean the

HEPA filter and Debris Screen right

away.

Brush Roll Warning Light

If while using the motorized floor brush

the brush becomes jammed or picks up

an object which causes the brush roll to

cease revolving, the red indicator light

will illuminate. In this case:

Brush Roll

Warning Light

1. Turn unit "Off" and unplug from wall

outlet.

2. Remove the motorized floor brush

from the main unit.

3. Use a Phillips #1 screwdriver and

remove the two (2) front screws from

the bottom of the motorized floor

brush. (Fig. 9)

Screws

Fig. 9

OPERATING INSTRUCTIONS

4. Remove the brush cover. (Fig. 10)

Fig. 10

5. To gently remove the object, hair

or fibers pull slowly to release.

Removing with scissors may be

necessary, however, avoid damaging

or cutting the bristles.

Emptying the Dust Cup Container

Important:

Do NOT use the vacuum

without ALL the filters in place.

Warning:

unit from electrical outlet before

opening the Dust Cup (container).

Filter

1. To remove the dust cup container,

turn the dust cup release lever to the

right. (Fig. 11)

Fig. 11

2. Remove the

dust cup from

the vacuum.

(Fig. 12)

3. To empty the dust

cup container,

hold the dust cup

from the handle

over a garbage

container and

press on the trap

door release button

that is on the front

side of the dust

cup container to release the dust cup

bottom (Fig. 13)

Fig. 13

Always unplug the

Fig. 12