Canon CR-2 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Cámara digital Canon CR-2. Canon CR-2 48 páginas. User guide
También para Canon CR-2: Manual del usuario (2 páginas)

Imprimir página

Safety Precautions

To prevent injuries and data loss, operate the CR-2 correctly by following the safety precautions.

WARNING

Prohibited

Do not damage the power cord

• Do not place anything heavy onto the power cord.

• Do not damage or modify the power cord.

• Do not forcibly bend, twist or pull the power cord.

• Do not hold the power cord when removing it from the AC outlet. Be sure to hold

the plug.

• Do not use an extension cable with the power cord. Connect it directly to the AC

outlet.

Handle the power cord carefully. If the cord is damaged, contact a Canon

representative or distributor for a replacement. Damaged cord may result in fire or

electric shock.

Do not disassemble or modify

Disassembled or modified instrument may result in fire or electric shock. Since the

CR-2 incorporates high-voltage parts that may cause electric shocks, touching

them may cause death or serious injury.

Do not leave alcohol, thinner, or any flammable chemicals

near the instrument.

Do not place near to a flammable solvent. Fire may result if the solvent spills or

evaporates and makes contact with internal electric parts. Some disinfectants are

flammable. Be sure to take care when using them.

Stop using immediately if there is an abnormality or problem

If an abnormality occurs, immediately unplug the power plug

and turn off the power of all the devices

• Smoke is emitted

• An unusual smell

• An unusual noise

• Foreign matter gets inside

• Damaged

Fire or electric shock may result if you keep using in such condition. Immediately

turn off the power of CR-2, unplug the power plug and turn off the power of all

connected devices. Then, contact a Canon representative or distributor.

Do not place anything on top

Fire or electric shock may result if water or any other liquid or a needle, paper clip or

any foreign matter gets inside the CR-2.

Do not use a power supply voltage other than that specified

on the rating label

Do not use any power cord other than the supplied

Use the power voltage specified on the rating label. Otherwise, fire or electric shock

may result.

The supplied power cord is designed exclusively for this product. Do not use any

other power cord.

2 Safety