Air Bike XC28 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Accesorios para bicicletas Air Bike XC28. Air Bike XC28 8 páginas. Fork

Imprimir página

MAINTENANCE

The reality is the more you look after your Air-Bike

Fork the longer it will last at optimum performance.

•

Your need to periodically maintain, inspect and

clean you fork. If you are riding in extreme weather

(winter, wet. muddy conditions or over rough

terrain then it is advised you should be maintaining

your fork more frequently.

•

After every ride make sure you clean the fork

stanchions (tubes) dust seals and maintain with

an oily cloth. When you are doing this check the

stanchions for dents, scratches or corrosion or

leaking oil.

MAINTENANCE PLAN

Firstly, check the function of your fork.

Here you are looking at the torques of the

mounting's screws and nuts on bottom of

lowers (torque suggested: bolt: 10Nm, nut:

8Nm)

Look for dents, cracks, discoloration, signs

of wear, signs of corrosion (not matter how

minimal, this can be maintained with oil

applied via a cloth) but also check for oil

leaks.

AIR BIKE

XC28 FORK USER GUIDE

•

Torque values of bolts and fasteners must be also

be checked. To maintain optimum performance, it

is recommended that your fork be disassembled,

inspected, cleaned, dried and re-lubricated. After

you've been on a ride simply wipe down the

stanchions and the seal.

•

Clean and inspect your bushings, check fastener

torques every 100 hrs (if the seasons are changing

and rain/snow/cold is expected get this done to

protect all parts from the harsh environment)

The disassembly and cleaning of the entire

fork (inside and out). This includes cleaning

and lubricating seals and slider sleeves.

Please check the torques and adjust them to

your preference.

Please make sure that before disassembly

you check the slider sleeve play of the fork.

You can do this by applying the front wheel

brake, smoothly push the bicycle back and

forth at the handlebar stem shaft and then

you can replace the slider sleeves if the play

is excessive (this shouldn't be any than 1 mm

at the fork brace).