Akura AHWDVD-806B Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Reproductor de DVD Akura AHWDVD-806B. Akura AHWDVD-806B 12 páginas.

Imprimir página

B a s ic O pe ra ti o n

1.Connect the Tv via the Scart lead to the DVD player

2.Turn on the Tv

3.Turn on the DVD player at the mains power switch

4.The red led will display that power is applied to the

DVD player

5.Either press the "Power" button on the player or

"Standby" on the R/C

6.This will enable the Tv to switch automatically to AV

and display the DVD "splash screen" on your Tv. If

your tv is of an older type that has not AV switching,

you must select AV manually on your Tv before

turning on the DVD player.

7.When the "Splash screen" is seen, press the Open/Close

button to open the DVD tray.

8.Place a DVD disc into the tray (label side up) and press

the Open/Close button again. (Do not push the DVD tray

to close) this may damage the mechanism.

9.The door will close and the DVD player will read the contents

of the disc and either start to play automatically or show a menu

of the discs contents.

10.To stop playing a disc, press "STOP" and remove the disc

as placing the disc.

11.When finished with the DVD Player, switch off using the Standby

button, the Tv will then revert to its normal operation.

12.If not using the DVD player again it is advisable, environmentally,

to switch the player off at the mains socket, rather than leaving in standby.

Basic Playback

PLAY/PAUSE

POWER

STOP

OPEN/CLOSE

Modes a nd F ea ture s S etup

SCREEN

S E T U P

1. Select [TV SYSTEM] in the

System Setup Menu

to display the [TV SYSTEM] Submenu:

P re s s

to s e lec t the m e nu i tem

A.P res s <E NT E R > to s et

B .P res s

repeatedly to return to the S etup Menu

[NTSC] -Select if you are using NTSC signal system to match your TV set.

[PAL]

-Select if you are using PAL signal system to match your TV set.

[AUTO] -Select this,the DVD player will match the TV set automatically.

* The default setting is AUTO.

2. SCREEN SA

VER

If the screen saver is on,when your DVD player is in Stop,Open,or No Disc

state,or there is a frame frozen for more than 180sec,the screen saver will

be displayed.This feature can protect the screen from damage.

[ON] - Choose this setting to activate the screen saver.

[OFF]- Choose the setting to cancel the screen saver.

* The default setting is ON.

3. VIDEO

Note: The Composite video and S-video output is always available.

[CVBS+YUV] -Select if you connected the DVD player to your TV

using the YUV(Y,Cb,Cr) output.

[YUV/P-SCAN] - Select if you connected the DVD player to your TV

using progressive scan(Y,Pb,Pr).

[CVBS+S-VIDEO]-Select if you connect the DVD player to your TV using

S-VIDEO output.

* The default setting is CVBS+S-VIDEO.

Advanced Features

4. TV TYPE

[4:3 PS] -Pan and scan refes to pictures where part of pictures is cut

off so it fills

the whole screen.

[4:3 LB] -Letter Box refers to pictures where black bands appear at

the top and bottom.

[16:9] -The picture fills the screen of a wide-screen(16:9) television.

* The default setting is 4:3PS.

Note: Not all DVDs offer movies in Full Screen format. If not, the disc

will override your TV

Display setting and the movie will be

displayed in Letter box

format.

5. PASSWORD

The password option is initialized locked, and you cannot set the ratings

limit or change the password. In order for the Rating feature work, the

password mode must be turned on. If you want to set the ratings limit, you

will need to enter the default password, which is 8888,then press

<ENTER> to confirm. To change the password, you will be prompted for

the old password, then be prompted for a new. Enter a 4-digit number

(this is your password).