Air cat 6520 Instrucciones de uso y lista de piezas - Página 2

Navegue en línea o descargue pdf Instrucciones de uso y lista de piezas para Sierra Air cat 6520. Air cat 6520 4 páginas. 3" reversible cut-off tool

Imprimir página

Important Warnings - Grinders & Cut-Off Tools

SPECIFICATIONS

Free Speed

Motor

Model No.

(RPM)

(HP)

6520

18,000

1/2

Air Supply

Tools of this class operate on a wide range of air pressure. It is recommended that air pressure of these tools measures 90 PSI at the tool while running free. Higher

pressure and unclean air will shorten the tool's life because of faster wear and may create a hazardous condition and void the warranty. Water in the air line will

cause damage to the tool. Drain the air tank daily. Clean the air inlet lter screen on at least a weekly schedule. The recommended hookup procedure can be viewed

in the illustration below. The air inlet, used for connecting air supply, has standard 1/4" NPT American Thread. Line pressure should be increased to compensate for

unusually long air hoses (over 25 feet). Minimum hose diameter should be 3/8" I.D. and ttings should have the same inside dimensions.

Collet /

Cutting

Wheel-

Gears

Capacity

Size (in)

3/4" Rolled

Direct Drive

Steel / 18 Gauge

Weight

Length

Exhaust

(lbs.)

(in)

Rear

1.6

7.0

Rec. Hose

Air Cons.

Air Inlet

Size

(CFM)

(in.)

3/8

1/4 NPT