American Standard 2431 Hoja de especificaciones
Navegue en línea o descargue pdf Hoja de especificaciones para Mobiliario interior American Standard 2431. American Standard 2431 2 páginas. American standard compact cadet 3 elongated toilet specification sheet
Imprimir página
COMPACT CADET® 3 ELONGATED TOILET
❑
2431.010
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Space saving compact design - Elongated bowl
fits in the same space as a round front toilet
• 12" (305mm) Rough-in
• EverClean
surface inhibits the growth of
®
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Featuring the Cadet
• Elongated siphon action jetted bowl with
2-1/8" trapway
• Internal trapway area fully glazed
• Generous 8" x 9" water surface area
• Close coupled tank with flat tank cover for
superior storage
• Oversized 3" Flush Valve with Chemical
Resistant Flapper
• Speed Connect
tank to bowl coupling system
®
• Sanitary dam on bowl with four point
tank stabilization
• 2 color match bolt caps
• Chrome Trip Lever
• Proven preferred styling
• 100% factory flush tested
• 5 year warranty
❑
3046.016 Elongated Bowl
❑
4019.016 Tank
Nominal Dimensions:
718 x 438 x 733mm
(28-1/4" x 17-1/4" x 28-7/8")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Seat: #5325.010 Elongated Champion
solid plastic seat and cover with easy lift off feature
❏ Seat: #5284.016 Elongated EverClean
seat and cover
❏ Seat: #5321.110 EverClean
Slow Close Snap-Off Hinges
❏ Supply with stop:
© 2008 AS America Inc.
3 Flushing System
®
Slow Close
®
®
solid plastic
®
Elongated Seat with
FINISHED WALL
716mm
(28-1/4)
191mm
(7-1/2)
470mm
(18-1/2)
C/L OF SEAT POST
HOLES 140mm
(5-1/2 CENTERS)
296mm
267mm
(10-1/2)
(11-5/8)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.
*
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
K73
COMPACT CADET
ELONGATED TOILET
VITREOUS CHINA
439mm
(17-1/4)
SUPPLY
AS
355mm
REQ'D.
(14)
381mm
(15)
*203mm
(8)
236mm
(9-5/16)
FINISHED
FLOOR
3
®
733mm
(28-7/8)
*152mm
(6)
Revised 2/08