DOMPEL VEGAS Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial DOMPEL VEGAS. DOMPEL VEGAS 6 páginas. Salon trolley

Imprimir página

LOCATION OF INSTALLATION

Install your Dompel product in a level and non-grooved place, avoiding rocking and vibration.
The place must be airy, but can't have direct incidence of sunlight and has to be far away from
SECURITY
Avoid accidents. After removing the product from the packaging, keep the packaging material
far away from kids.

CLEANING AND MAINTENANCE

Do not use metal spatulas, brushes and cleaning agents such as alcohol, acetone, kerosene,
gasoline, bleach, thinner, solvents, acids, vinegar or other chemicals or abrasives not
recommended in this manual.
To clean it easily, it is recommended to use a solution with warm water and neutral soap and
after dry carefully. Plastic parts can't be washed with boiling water. Do periodical cleaning on
your equipment, accumulated dust can affect the beauty of the product.

INSTALLATION AND ASSEMBLY

Remove all components from the package. The 4 casters are in a plastic bag inside the
carton. The assembly of this product is totally manual and requires no tools.
1
1- Place the base (A) on
countertop and insert the
long plastic extender (C).
4
4 - Assemble the top (G) on
the short plastic extension
(F) from the last drawer
module (D).
7
7 - Assembly the hair dryer holder (H)
in one of the 4 corners of the top (G).
MERELY ILLUSTRATIVE IMAGES.
Products may suffer changes in its components without prior warning. If any questions,
contact Dompel.
2
2 - Assemble the drawer
module (D) over the long
plastic extension (C). The
correct drawer module
assembly position is with
the sides aligned with the
widest part of the base.
5
5 - Insert the 4 casters (B)
into the base (A) (make
aligned when supported on
8
8 - The removable drawers (E) can be
attached to the sides of the table top to
extend the working space as desired.
3
3 - Assemble the short
plastic extension (F) to the
top of the drawer module
(D). repeat this process in
the next 4 modules.
6
6 - Assemble the drawers
(E) on the rails of the
drawer modules (D).
access of the drawers will
be given on both sides of
the trolley.