American Standard Champion 4 Round Front Complete Toilet 2585.000 Hoja de especificaciones
Navegue en línea o descargue pdf Hoja de especificaciones para Mobiliario interior American Standard Champion 4 Round Front Complete Toilet 2585.000. American Standard Champion 4 Round Front Complete Toilet 2585.000 1 páginas. Champion 4 round front complete toilet
Imprimir página
CHAMPION
4 ROUND FRONT
®
COMPLETE TOILET
❑
2585.000
• Vitreous china
• EverClean
surface inhibits the growth of stain
®
and odor causing bacteria, mold and mildew on
the surface
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® 4 Flushing System
performance platform
• 4" non-adjustable, piston action Accelerator™
flush valve
• Siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect
tank/bowl coupling system
®
• Chrome-plated trip lever
• Sweeping pier on bowl
• 100% factory flush tested
• 2 bolt caps
• Color-matched plastic toilet seat
and cover with EverClean
• Wax ring gasket with closet bolts
• 10 year warranty
Nominal Dimensions:
721 x 464 x 797mm
(28-3/8" x 18-1/4" x 31-3/8")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability - July, 2003 revision
To Be Specified:
❏ Color: ❏ White
❏ Supply with stop:
© 2008 AS America Inc.
ROUND FRONT COMPLETE TOILET
surface
®
FINISHED WALL
721mm
(28-3/8)
51mm ± 6mm
(2 ± 1/4)
235mm
(9-1/4)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
264mm
362mm
(10-3/8)
(14-1/4)
C/L OF OUTLET
305mm
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
K104
CHAMPION
VITREOUS CHINA
464mm
(18-1/4)
356mm
(14)
SUPPLY
AS
REQ'D
387mm
(15-1/4)
*
254mm
(10)
152mm
(6)
FINISHED
FLOOR
254mm
(10)
Revised 2/08
4
®
797mm
(31-3/8)