American Standard Colony 4392.500 Hoja de especificaciones
Navegue en línea o descargue pdf Hoja de especificaciones para Mobiliario interior American Standard Colony 4392.500. American Standard Colony 4392.500 1 páginas. Round front toilet
COLONY™ ROUND FRONT TOILET
❑
2388.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Round front siphon action jetted bowl
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested
❑
3338.012 Bowl
❑
4392.016 Tank
Nominal Dimensions:
711 x 508 x 743mm
(28" x 20" x 29-1/4")
Fixture only, seat and supply by others
Alternate Tank Configurations Available:
❑
4392.500 Tank complete with Aquaguard Liner
❑
4392.800 Tank complete with trip lever located
on right side
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: American Standard #5322.011 "Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #5308.014 "Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
© 2008 AS America Inc.
ROUND FRONT TOILET
FINISHED WALL
711mm
(28)
19mm ± 6mm
(3/4 ± 1/4)
229mm
(9)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
159mm
308mm
(6-1/4)
(12-1/8)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
K96
COLONY™
VITREOUS CHINA
508mm
(20)
C/L
SUPPLY
AS
REQ'D
381mm
(15)
365mm
*
203mm
(14-3/8)
(8)
152mm
(6)
FINISHED
FLOOR
235mm
(9-1/4)
Revised 2/08
743mm
(29-1/4)