American Standard CADET 2776 Manual de funcionamiento y mantenimiento - Página 3
Navegue en línea o descargue pdf Manual de funcionamiento y mantenimiento para Bañeras American Standard CADET 2776. American Standard CADET 2776 6 páginas. Whirlpools
Imprimir página
Operation: SYSTEM I WHIRLPOOL
BATHING:
• Fill bath with water at a comfortable bathing temperature - If your whirlpool is equipped with the optional
EZ-Heater, it will automatically maintain the water temperature.
• IMPORTANT: Do not fill the whirlpool more than 2/3 full before getting in, as it may overflow.
• IMPORTANT: Do NOT add bath oils or salts – this will damage the whirlpool pump.
• IMPORTANT: Water level must be at least one inch (25mm) above the highest jet before the whirlpool is
started. Operating the system without water (dry running) for extended periods will cause
pump damage and void the warranty.
STARTING WHIRLPOOL:
• Press on/off button to start whirlpool.
STOPPING WHIRLPOOL:
• Press on/off button again to stop whirlpool.
AIR VOLUME CONTROL ADJUSTMENTS:
• Water turbulence is determined by the amount of air mixed with the water. Rotate the air volume control
counterclockwise for more turbulence--clockwise for less.
FLOW JET VOLUME ADJUSTMENTS:
• The water flow action may be adjusted from vigorous to soft by rotating the nozzle clockwise for vigorous
massage and counter-clockwise for soft massage.
SOFTER MASSAGE
(counterclockwise)
MORE AIR
LESS AIR
MORE VIGOROUS MASSAGE
(clockwise)
3
755043-100 Rev. A