American Standard Colony 2740.102 Hoja de especificaciones - Página 2

Navegue en línea o descargue pdf Hoja de especificaciones para Bañeras American Standard Colony 2740.102. American Standard Colony 2740.102 2 páginas. 5' x 30" w/integral apron whirlpool & bathing pool high gloss acrylic
También para American Standard Colony 2740.102: Especificaciones (2 páginas)

Imprimir página
7
(178mm)
C/L OF DRAIN
3/4
(19mm)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
1-1/2 O.D.
TAILPIECE
30
(762mm)
C/L OF
SUPPLIES
HORIZONTAL TAILPIECE
ABOVE FLOOR OUTLET
1-1/2 (38mm)
OPTIONAL TO
7/8 WATER
FINISHED FLOOR
RETENTION
USUALLY BETWEEN
FLANGE
65 & 78
(3 SIDES)
(1651 & 1981mm)
C/L OF
OVERFLOW
3
(76mm)
TOP OF
DECK
19-1/4
(489mm)
ROUGH
FLOOR
3-3/4
(95mm)
BATH SUPPORT
MATERIAL
GENERAL SPECIFICATIONS FOR 2740 WHIRLPOOL
59-7/8 x 29-7/8 x 19-1/4 (1521 x 759 x 489mm)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
3
CUBE (FT
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
NOTES:
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2740.118).
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and
A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2007 American Standard Inc.
COLONY™ 5' x 30" w/INTEGRAL APRON
60
(1524mm)
WATER
RETENTION
FLANGE
(3 SIDES)
(1) AIR VALVE
ACCESS TO PUMP/MOT
THROUGH REMOVABLE
(6) JETS
FRONT ACCESS PANEL
C/L OF
SHOWER ARM
FINISHED
WALL
C/L OF
VALVES
C/L OF
12
SPOUT
(305mm)
LEVELING
OPT.
4
STRINGER
TILING
(102mm)
NOT FOR
FLANGE
SUPPORT
19
(483mm)
2-1/2
(64mm)
105 Lbs. (47 Kgs.)
480 Lbs. (216 Kgs.)
45 Gal. (171 L)
38 Gal. (144 L)
20 x 46 (508 x 1168mm )
25-1/2 x 55-1/2(648 x 1410mm )
11-1/2 (292mm)
39 Lbs./Sq.Ft. (188 Kgs./Sq.m)
20.8
35.3
1.1 HP, 9.9 AMPS,120V.
WHIRLPOOL & BATHING POOL
6-1/4
(159mm)
C/L OF DRAIN
3/4
(19mm)
FINISHED
WALL
14-1/8
SEE FITTING
SPECS FOR
(359mm)
DIMENSIONS
1-1/2 O.D.
TAILPIECE
ON/OFF
SWITCH
29-7/8
(759mm)
PUMP
C/L OF
SUPPLIES
HORIZONTAL TAILPIECE
ABOVE FLOOR OUTLET
1-1/2 (38mm)
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
65 & 78
(1651 & 1981mm)
TOP OF
UNDERSIDE
DECK
OF DECK
ROUGH
FLOOR
BATH SUPPORT
GENERAL SPECIFICATIONS FOR 2740 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
H66
HIGH GLOSS ACRYLIC
59-7/8
(1521mm)
C/L OF
SHOWER ARM
FINISHED
7/8 WATER
RETENTION
FLANGE
(3 SIDES)
12
C/L OF
(305mm)
OVERFLOW
OPT.
4
3
LEVELING STRINGER
(102mm)
(76mm)
NOT FOR SUPPORT
19-1/4
(489mm)
3-3/4
(95mm)
(64mm)
MATERIAL
59-7/8 x 29-7/8 x 19-1/4 (1521 x 759 x 489mm)
462 Lbs. (208 Kgs.)
20 x 46 (508 x 1168mm )
25-1/2 x 55-1/2(648 x 1410mm )
37 Lbs./Sq.Ft. (179 Kgs./Sq.m)
WATER
RETENTION
FLANGE
(3 SIDES)
14-1/8
(359mm)
WALL
C/L OF
VALVES
C/L OF
SPOUT
UNDERSIDE
OF DECK
19
(483mm)
2-1/2
70 Lbs. (32 Kgs.)
47 Gal. (178 L)
11-1/2 (292mm)
20.8
35.3
Revised 1/07