D2G Gravitee GK-1014 Instrucciones de instalación - Página 8
Navegue en línea o descargue pdf Instrucciones de instalación para Mobiliario interior D2G Gravitee GK-1014. D2G Gravitee GK-1014 11 páginas. 10' x 10' display
Imprimir página
© 2022
Order #XXXXX
Limited space in corners requires
extra attentive installation.
S E G
S E G
GK-1014 SEG Graphics
S E G
S E G
S E G
S E G
SEG Graphic Attachment
Corner A
Corner B
Corner D
Corner C
It is important to first insert
Step 1
graphic into each alternate
Insert corner A. Turn edge of
corner, then to the sides of
graphic so silicon welt is
S E G
the frame. If this is not done,
perpendicular to face of
graphic will not fit into the
graphic. Insert narrow side
frame correctly.
of welt with fabric to outside
into the channel. Repeat for
other side of this corner.
Step 3
Once all corners are inserted,
press one silicon edge into
channel from corners and
work
toward
Make sure welt is fully inserted
into channel. Continue until
all sides are done. Smooth
out edges of graphic.
Steps:
1) Install SEG graphics to assembled panels as shown.
Step 2
Repeat Step 1 for opposite
corner C, then insert corner
B, followed by corner D, to
complete the installation of
the corners.
Graphic Removal
the
center.
To remove the graphic
from
the frame, locate the fabric
pull tab. Gently pull up on the
tab to remove the fabric.
Step 3 of 6