American Standard Savona Elite Corner Whirlpool 2902E Instrucciones de instalación
Navegue en línea o descargue pdf Instrucciones de instalación para Bañeras American Standard Savona Elite Corner Whirlpool 2902E. American Standard Savona Elite Corner Whirlpool 2902E 4 páginas. Savona elite corner whirlpool high gloss acrylic shown less all fittings
Imprimir página
SAVONA
ELITE CORNER™
HIGH GLOSS ACRYLIC
SHOWN LESS ALL FITTINGS
1067 mm
(42)
RECOMMENDED
FITTING LOCATION
64 X 330mm (2-1/2 X 13)
OUTLINE OF
CUTOUT
1048mm
(41-1/4)
51 mm
C/L OF
(2)
OVERFLOW
LEVELING
STRINGER
NOT FOR
SUPPORT
44 mm
INTEGRAL
(1-3/4)
FEET
89 mm
(3-1/2)
1-1/2 O.D. TAILPIECE
GENERAL SPECIFICATIONS FOR 2902E WHIRLPOOL
INSTALLED SIZE
82-1/2 x 69-1/2 x 22-1/2 In.(2096 x 1765 x 572mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor
immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before
enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect
the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,
motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and
enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead
(required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
752866-100 Rev. B
2902E SERIES
WHIRLPOOL
INSTALLATION INSTRUCTIONS
PROVIDE ACCESS
1067 mm
TO PUMP FOR
(42)
SERVICING ON ALL
INSTALLATIONS
IN-LINE HEATER
REMOVABLE BLANK
ON/OFF
SWITCH
102mm
(4)
CUTOUT
IN FLOOR
FOR
DRAIN
914mm
(36)
PUMP
203mm
(8)
C/L
1-1/2 O.D. DRAIN
OUTLET
2096mm
(82-1/2)
102mm
(4)
572 mm
(22-1/2)
521 mm
(20-1/2)
ROUGH
FLOOR
1-1/2 N.P.T.M.
THREADS
144 Lbs. (65 Kg.)
803 Lbs. (361 Kg.)
79 Gal. (299 L)
73 Gal. (277 L)
38 x 30 In. (965 x 762mm)
58 x 55 In. (1473 x 1397mm)
15-3/4 In. (400mm)
33 Lbs./Sq.Ft. (165 Kgs./Sq.m)
41.7
68.4
2.1 HP, 14.4 AMPS, 120V.
THANK YOU...
for selecting an American Standard bath. Your new
bath is shipped to you after careful inspection. The
whirlpool version is completely assembled with pump,
motor, and system piping. All you need to finish the
1765 mm
installation are your selected fittings and electrical
(69-1/2)
connections for a whirlpool.
To insure maximum performance and pleasure from
this product, please follow the instructions and
cautions.
List of Optional Components (not included):
• Flex-Jet Pulse Jet Kit*
• Flex-Jet Soft Jet Kit*
• E-Z-Install Heater*
• Tile Bead Kit*
List of Required Components (not included):
• Drain*
* see your Home Depot Retailer
List of Required Tools and Supplies:
Tools
• Level
• Tape Measure
• Pipe Wrench
• Slip Joint Pliers
• Screw Driver
• Standard
Woodworking Tools
• Personal Safety
Equipment
• Caulking Gun
• Bath Filler*
Supplies
• Nails
• Putty
• Caulking (waterproof)
• 1 x 3 or 2 x 2
• Drop Cloth
• 20 amp GFI
• Cement, Plaster,
© American Standard Inc. 2003
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.
Stringers
Outlet
Grout