American Standard TOWN SQUARE 2742 Hoja de especificaciones - Página 2

Navegue en línea o descargue pdf Hoja de especificaciones para Bañeras American Standard TOWN SQUARE 2742. American Standard TOWN SQUARE 2742 2 páginas. American standard bathing pool installation guide
También para American Standard TOWN SQUARE 2742: Lista de piezas (1 páginas), Manual de instalación (17 páginas)

American Standard TOWN SQUARE 2742 Hoja de especificaciones
13-1/4"
(337mm)
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF BATH
IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM
PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA Certified.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
4"
35-3/4"
(102mm)
(908mm)
C/L OF
26-3/4
DRAIN
(679mm)
OUTLET
41-3/4"
(1060mm)
7-3/4" TYPICAL
(197mm)
3/4"
(19mm)
OUTLINE OF SKID
OUTLINE OF CUTOUT
RESISTANT SURFACE
70" X 40-1/4" (1778 X 1022mm)
2"
(51mm)
AIR BLOWER
INTEGRAL FEET WITH
ATTACHED BASEBOARD
1-1/2" O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2742
AIR MASSAGE SYSTEM
INSTALLED SIZE
71-1/2 x 41-3/4 x 22 In. (1816 x 1060 x 559mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
)
3
ELECTRICAL SPECIFICATIONS
BLOWER
TOWN SQUARE
71-1/2"
(1816mm)
INTEGRAL
FITTING DECK
2-1/4" X 14"
(57 X 356mm)
10-1/4"
(260mm)
FLOOR CUTOUT
9" X 19"
(229 X 459mm)
20 AIR JETS
LEVELING STRINGER
(NOT FOR SUPPORT)
(83mm)
ROUGH
FLOOR
1-1/2" N.P.T. THREADS
5/8"
(16mm)
115 Lbs. (52 Kg.)
690 Lbs. (313 Kg.)
69 Gal. (261 L)
41 x 21-1/2 In. (1041 x 546mm)
62 x 31-1/2 In. (1574 x 800mm)
14-1/4 In. (362mm)
33 Lbs./Sq.Ft. (163 Kgs./Sq.m)
1.0 HP, 10 AMPS ,120V.
H24
PREMIUM AIR BATH
CONTROL
PANEL
3"
(76mm)
EDGE OF
FLOOR
CUTOUT
AIR BLOWER
PROVIDE ACCESS
TO BLOWER FOR
SERVICE ON ALL
INSTALLATIONS
C/L OF
OVERFLOW
22"
3-1/4"
(559mm)
20"
(508mm)
3"
(76mm)
27.8
55.7
6' x 42"
®
HIGH GLOSS
Rev. 2/08