American Standard Williamsburg Elite 2425E-RHO Hoja de especificaciones - Página 2
Navegue en línea o descargue pdf Hoja de especificaciones para Bañeras American Standard Williamsburg Elite 2425E-RHO. American Standard Williamsburg Elite 2425E-RHO 2 páginas. 5' whirlpool, integral apron with removable access panel high gloss acrylic shown less all fittings
También para American Standard Williamsburg Elite 2425E-RHO: Instrucciones de instalación (4 páginas)
Imprimir página
WILLIAMSBURG ELITE™ 5' INTEGRAL APRON
12
(305mm)
10-1/4
(260mm)
3/4
(19mm)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
32
(813mm)
C/L OF
3
SUPPLIES
(76mm)
C/L OF DRAIN
OPTIONAL TO
FINISHED FLOOR
1" WATER
USUALLY BETWEEN
RETENTION
65 & 78
FLANGE
(1651 & 1981mm)
(3 SIDES)
C/L OF
OVERFLOW
3-1/2
(89mm)
TOP OF
DECK
21-1/2
(546mm)
ROUGH
FLOOR
BATH
SUPPORT
MATERIAL
GENERAL SPECIFICATIONS FOR 2425E WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
3
CUBE (FT
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE
INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or
voided leaflet.
© 2003 American Standard Inc.
WHIRLPOOLS BY AMERICAN STANDARD
60
(1524mm)
WATER
RETENTION
FLANGE
(8) JETS
(3 SIDES)
9
(229 mm)
PUMP
CUTOUT IN FLOOR FOR DRAIN
(2) AIR VALVES
C/L OF
SHOWER ARM
FINISHED
WALL
IN-LINE HEATER
REMOVABLE
C/L OF
BLANK
VALVES
C/L OF
12
SPOUT
(305mm)
OPT.
4
TILING
(102 mm)
FLANGE
1-1/2 N.P.T.M.
THREADS
2-3/4
(70mm)
1-1/2 O.D.TAILPIECE
60 x 32 x 21-1/2 (1524 x 813 x 546mm)
115 Lbs. (52 Kg.)
574 Lbs. (258 Kg.)
55 Gal. (208 L.)
45 Gal. (171 L.)
16-1/4 x 38-1/4 (413 x 972mm)
26-1/4 x 52-1/2 (667 x 1334mm)
15 (381mm)
43 Lbs./Sq.Ft. (208 Kgs./Sq.m)
1.6 HP, 9.7 AMPS,120V.
HIGH GLOSS ACRYLIC
16
(406mm)
ON/OFF
SWITCH
ACCESS TO PUMP/MOTOR
THROUGH REMOVABLE
FRONT ACCESS PANEL
LEVELING STRINGER
NOT FOR SUPPORT
UNDERSIDE
OF DECK
21-1/4
(540mm)
REF.
DIM
4-5/8
(117mm)
20.8
35.3