Da-Lite IDEA Panoramic Libro de instrucciones - Página 7

Navegue en línea o descargue pdf Libro de instrucciones para Pantalla de proyección Da-Lite IDEA Panoramic. Da-Lite IDEA Panoramic 12 páginas.
También para Da-Lite IDEA Panoramic: Libro de instrucciones (8 páginas), Libro de instrucciones (12 páginas)

Imprimir página

Assembly Instructions for Panoramics with Full Length Marker Tray

Carefully unpack unit and place all panels on top of the clean

work area. The viewing surface of each panel must face down.

NOTE: For optimal seam alignment, use labels on the back side

of each panel to arrange for assembly.

2. Slide all three panels together, aligning the both the top and

bottom frames (Figure 5).

3. Find (1) seam brace and remove the release liner from both strips

of adhesive tape.

4. Ensuring that the panels are still in alignment, line up the seam

brace with one of the panel seams with adhesive side facing

down. Do not press adhesive into panels yet. Maintain at least a

small gap between the adhesive and the panel.

Figure 5

10-32 Nuts

Seam Braces

Figure 6

5. Use ⅜" open wrench or socket driver and (4) 10-32 nuts to attach

seam brace onto the studs on the top and bottom of screen

frame at the panel seam. Tighten all four nuts once attached to

the frame (Figure 6).

NOTE: For optimal seam alignment, hold the panels together

tightly while the seam brace is being adhered and the lock nuts

are being tightened.

`6. Press adhesive into panels. Apply steady pressure along the

length of the seam brace to attach firmly.

7. Repeat Steps 3-6 to attach the other seam brace.