Da-Lite IDEA Screen Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Pantalla de proyección Da-Lite IDEA Screen. Da-Lite IDEA Screen 16 páginas. For epson brightlink displays (16:9)
También para Da-Lite IDEA Screen: Libro de instrucciones (8 páginas), Libro de instrucciones (12 páginas), Instrucciones (2 páginas)
Imprimir página
Wall Mounting Instructions
Determining Screen Placement: When installing the IDEA Screen with BrightLink projectors, you must leave at least 22" (56 cm) of
space between the top of the screen and the ceiling to accommodate the projector wall mount.
NOTE: Use appropriate mounting hardware for the wall type and
to accommodate for the screen's hanging weight (Figure 2).
Hardware is not provided.
1.
Secure the wall bracket to wall studs at the desired height. Center
the wall bracket with the screen frame. You will need at least 1"
REVISIONS
clearance above the drilled holes to hang the screen (Figure 2).
2. To install the (2) L-brackets, you must measure the overall height
of the screen frame and subtract 1⅛" (29 mm). Using that
dimension, measure down from the top edge of the wall brackets
and mark the wall for two screw holes. The outside edge of each
L-bracket must be no greater than 5" (127 mm) away from the left
and right edges of the screen frame (Figure 2).
CHNGD BY:
DATE:
3. Secure the two L-brackets to the wall at the marked locations. The
longest side of the two L-brackets should be pointing upwards
when secured in order to hide the L-brackets behind the screen
frame once the screen is installed.
NOTE: The L-brackets are necessary to maintain a flat
surface for touch interactivity.
APPR'D BY:
4. This step requires two people. Hang the screen on the wall
brackets. There is a lip on the back of the frame that wedges itself
into the wall brackets once fully installed. Ensure that the screen
clears the L-brackets and that the screen weight is on the wall
brackets, not the L-brackets.
Screws (Not Supplied)
Figure 2
TOLERANCES:
DECIMAL:
.XX = ±.010
THIS PRINT SUPERSEDES
PRINT DATED PRIOR T
Wall Bracket
L-Bracket
SCALE:
DRAWN BY:
1:18
ADW
MATERIAL NO:
5/30/2014
No More
than 5"
(127 mm)
DATE:
5
4/16/2014
FINISH: