eKey FS UP E SC RFID Crestron Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Controladores de acceso IP eKey FS UP E SC RFID Crestron. eKey FS UP E SC RFID Crestron 17 páginas.
Imprimir página'Holding up the RFID transponder':
The 'holding up the RFID transponder' option is only available for finger scanners with an RFID
function.
Step
Figure
5th
4.4.4
Optical signals on the finger scanner
There are 2 types of LED:
□
Status LED for operating status
□
Function LED for indicating the function of the overall system.
Fig. 4:
Optical signals on the
finger scanner
5
Installation and activation
5.1
Activating the system
Mount and cable the product correctly before connecting power.
Failure to do so will create a risk of possible property damage!
Do not connect the power supply beforehand!
Mount the system in accordance with the supplied mounting instructions.
Cable the system in accordance with the supplied wiring diagram.
6
Activating the finger scanner
Activating the registration units and the controller couples these devices.
In order to begin activation of the ekey finger scanner in the Crestron system, the activation of
the Controller and of the Touch Screen must first be completed.
Installation and activation
NOTICE
Description
Hold the RFID
transponder face
parallel to the finger
swipe area of the
finger scanner at a
distance of 1 to
5 cm.
3 Status LED
4 Function LEDs
ATTENTION
www.ekey.net
en│8