Da-Lite Advance MPS-ACM Instrucciones - Página 4

Navegue en línea o descargue pdf Instrucciones para Bastidores y soportes Da-Lite Advance MPS-ACM. Da-Lite Advance MPS-ACM 4 páginas. Mobile plasma stand automated confidence monitor

Imprimir página

10. Hang the plasma unit on the Zee-Bars making

sure the top and bottom notches on each Hanging

Bracket are placed over the upper and lower Zee-

Bars. See Figure 5.

11. Slide the Security Bar through the slots in the

Hanging Brackets, bolt one end to the Zee-Bar

then secure the opposite end with the pad lock.

See Figure 5 & 6.

12. Install Power Supply. See Figure 7.

13. Plug electrical cord into power supply.

14. Connect power plug into power jack on the side of the

electrical housing.

15. A remote control is included in the carton of the power

supply. Use the remote control or rocker switch on the

side of the electrical housing to operate the tilt as needed.

16. The small red button on

the remote is for "stop" but

is not needed. The

confidence monitor will

stop with the release of

either the "up" or "down"

button. See Figure 8. The

rocker switch will operate

the confidence monitor in

the same manner.

17. Install tube enclosures. See Figure 9.

18. Install fasteners into top of Columns for theft deterrent.

Figure 8

Figure 5

Figure 6

Figure 7

Figure 9