Da-Lite Da-Lift 10M Libro de instrucciones - Página 5

Navegue en línea o descargue pdf Libro de instrucciones para Sistemas de elevación Da-Lite Da-Lift 10M. Da-Lite Da-Lift 10M 8 páginas. Projector lift 220v
También para Da-Lite Da-Lift 10M: Libro de instrucciones (8 páginas)

Imprimir página

Electrical Wiring - Models 15, 19, 19L

Install electrical hook up that applies to your unit. Make sure to

review your Electrical Installation Checklist and wiring diagram

(see Figure 3) for 120-volt switch, 220/240-volt switch, or DRC

low voltage control.

NOTE: Da-Lift projector lift has been internally wired at

Da-Lite. External wiring is completed by installer conforming

to local and national codes. Be sure the wires are long

enough for the Da-Lift to go up and down.

120V Wiring Diagram

120V.

Plug-In For T. V .

Figure 3

This Switch Cannot

Be Used With L. V .C.

240 Volt Wiring Diagram

Da-lite offers two styles of 240-volt wall switches for standard operation.

Please see wiring diagram included in wall switch box included with screen.

Up Limit

Switch N.C.

Opens When

Operated

Black (Hot)

White (Common)

120V.

Black (Hot)

Operating Switch,

Switch Box, And

Plate Furnished With

Da-Lift. (SPDT With

Center Off)

Red (Down)

Off

Down

Side View Of

Switch & Box

2. Test installation by carefully running Da-Lift "up" and "down"

several times. Be prepared to stop the Da-Lift. Duty cycle is three

(3) minutes ON and three (3) minutes OFF.

3. Make sure Da-Lift stops in the up direction flush with the ceiling.

Junction

Box

Green

Black & Yellow

Black (Up)

AC Common

AC Hot

120V. AC 60Hz.

2.2 AMP. Max