American Standard Triangle Cadet PRO Instrucciones de instalación Cuidado y mantenimiento - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación Cuidado y mantenimiento para Aseos American Standard Triangle Cadet PRO. American Standard Triangle Cadet PRO 6 páginas. 2-piece toilet elongated and round front

ROUGHING-IN DIMENSIONS: NOTE: Distance from wall to closet flange centerline must be as shown below.
Elongated Model 216AD Series
492mm
(19-3/8")
815mm
(32-1/16")
356mm
(14")
419mm
(16-1/2")
Before You Start:
Turn Off Water Supply
Recommended fitting type for
back-to-back installations.
1
NOTE: 1/4" EZ-BOLTS INCLUDED.
IF 5/16" BOLTS ARE REQUIRED,
PURCHASE SEPARATELY.
82mm
(3-1/4")
FINISHED
WALL
140mm
(5-1/2")
FINISHED
FLOOR
If Removing An Existing Toilet
Flush to remove
water from tank;
sponge remaining
water from
bowl before
removing toilet.
Depending upon your plumbing and venting conditions, the flow from the Cadet
back-to-back installation may create a vacuum on the system and draw water from the opposing
bowl. The National Standards Plumbing Code prohibits the use of a cross fitting for drainage as
throw over is possible. The code does approve a directional "Y" style fitting with proper venting to
direct the water downward and away from the other toilet.
FINISHED
WALL
815mm
(32-1/16")
894mm
(35-3/16")
470mm
(18-1/2")

BACK-TO-BACK INSTALLATION

2
Press firmly.
- 2 -
Round Front Model 216BD Series
492mm
(19-3/8")
82mm
(3-1/4")
FINISHED
WALL
356mm
(14")
419mm
(16-1/2")
FINISHED
FLOOR
Clean Flange
Caution: If leaving floor flange
!
open for more than 1-2 hours,
cover flange to prevent escaping
sewer gases.
FINISHED
WALL
843mm
(33-3/16")
140mm
(5-1/2")
419mm
(16-1/2")
®
PRO in a
Wax Ring
(sold separately)
7 3 019 4 8 - 10 0