EKF Diagnostics DiaSpect Tm Instrucciones breves

Navegue en línea o descargue pdf Instrucciones breves para Equipamiento médico EKF Diagnostics DiaSpect Tm. EKF Diagnostics DiaSpect Tm 2 páginas. Hand-held hemoglobin analyzer

Imprimir página

Short instruction for use of the DiaSpect T

Always read the Operating Manual before using the DiaSpect system.

Measuring

1. Place the filled cuvette in the cuvette holder and press down gently until you feel a "click".

2. The hemoglobin value will be displayed instantly.

3. Pull out the cuvette quickly. Dispose of the used cuvette in a container for potentially infectious waste.

Record the test result as soon as the checkmark

4. The result will remain on the display until replaced by the next measurement. To erase the latest

result, simply make a "blank" measurement by pressing down the empty cuvette holder.

Cleaning

1. Hold the backside of the cuvette holder and pull it out from the analyzer.

2. Clean the cuvette holder with cold water or a mild detergent, followed by disinfectant.

3. Reinsert the dry cuvette holder.

To disinfect the instrument, use conventional solvent-free surface disinfectants, or alcohol based substances

such as 70% isopropyl alcohol.

Do not spray the instrument when cleaning, as this will damage the instrument!

Charging

DiaSpect Tm has an inbuilt rechargeable battery. A USB cable and a power supply for charging of the battery are

supplied. A battery symbol in the display shows the current charging state. The flash symbol indicates that the

instrument is connected to power. Leaving the instrument connected to power when the battery is fully charged

will neither overcharge the battery nor decrease its lifespan.

DiaSpect T

short instruction GB-02

page 1 of 2

is shown.

system