Donaldson Torit RWB-3000 Manual de instalación y funcionamiento - Página 8
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Equipamiento industrial Donaldson Torit RWB-3000. Donaldson Torit RWB-3000 12 páginas. Remote weld bench
Imprimir páginaDonaldson Company, Inc.
Service
Scheduled Maintenance (See Figure 4)
1. Remove the welding work surface by lifting at
the eyebolts. See Figure 4, Scheduled
Maintenance.
2. Remove the backdraft panel. See Backdraft
Panel Section.
3. Remove the maintenance access panel.
4. Use dry sweeper or brush to clean the back wall
and inside of hopper. Depending on the fume
or dust properties, a putty knife may be used.
Dispose of contaminants properly.
8
5. Reinstall welding work surface, maintenance
access panel, and backdraft panel.
6. Regular dust removal in the maintenance sched-
ule can reduce the risk of fire hazard.
7. The Remote Weld Bench should be cleaned
every 8 to 12 hours of operation.
backdraft panel
weld work
surface
Figure 4, Scheduled Maintenance
maintenance access panel