American Standard Princeton 2393.202 Hoja de especificaciones - Página 2
Navegue en línea o descargue pdf Hoja de especificaciones para Bañera de hidromasaje American Standard Princeton 2393.202. American Standard Princeton 2393.202 2 páginas. Princeton recess bath
También para American Standard Princeton 2393.202: Instrucciones de instalación (4 páginas)
Imprimir página
BARRIER FREE
NOTE:
Dimensions shown for
GENERAL SPECIFICATIONS FOR 2390/2391 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
Below is shown typical cross sections of the tub
rim showing typical wall constructions.
WOOD STUDS
STUD
SHIM
DRY WALL
TILE
ROOFING NAIL
SEALANT
TUB
51 x 102mm (2 x 4) WOOD
STRINGER FULL LENGTH
© 2008 AS America Inc.
2390/2391
only. Refer to installation instruction for
48mm
32mm
(1-7/8)
C/L OF DRAIN
(1-1/4)
362mm
(14-1/4)
762mm
(30)
C/L OF
SUPPLIES
89mm
(3-1/2)
SEE FITTING SPECS
FOR DIMENSION
VALVES
102mm
305mm
(4)
(12)
64mm
(2-1/2)
356mm
(14)
1-1/2 N.P.T.
THREADS
1-1/2 O.D.
TAILPIECE
60 x 30 x 14 In. (1524 x 762 x 356mm)
110 Lbs. (50 Kg.)
460 Lbs. (209 Kg.)
42 Gal. (159 L)
42 x 19 In. (1067 x 483mm)
56 x 25 In. (1423 x 635mm)
9-1/2 In. (241mm)
37 Lbs./Sq.Ft. (175 Kgs./Sq.m)
6.2
18.1
STEEL STUDS
STEEL
STUD
SHIM
WASHER
DRY WALL
TILE
SEALANT
4" (102mm)
DRYWALL
SCREW
TUB
AMERICAST
1524mm
(60)
197mm
(7-3/4)
FINISHED
WALL
229mm x 305mm
(9 x 12) CUTOUT
C/L OF
FINISHED
WALL
C/L OF
TILING FLANGE
SPOUT
25mm
(1)
346mm
SEE
(13-5/8)
NOTE
117mm
(4-5/8)
GENERAL SPECIFICATIONS FOR 2392/2393 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
NOTES:
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS.
(2391.202).
SHOWN WITH POP-UP C.D. & O.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH FITTING.
CONCEALED PIPING NOT FURNISHED.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4 These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaflet.
H112
PRINCETON™
RECESS BATH
BRAND ENGINEERED MATERIAL
®
2392/2393
above floor installation.
19mm
(3/4)
FINISHED
WALL
C/L OF
SHOWER ARM
1651-1981mm
(65-78)
OPTIONAL
70mm
(2-3/4)
ROUGH
FLOOR
60 x 30 x 17-1/2 In. (1524 x 762 x 445mm)
42 x 19 In. (1067 x 483mm)
56 x 25 In. (1423 x 635mm)
38 Lbs./Sq.Ft. (182 Kgs./Sq.m)
119 Lbs. (54 Kg.)
469 Lbs. (213 Kg.)
42 Gal. (159 L)
9-1/2 In. (241mm)
7.4
21.2
Revised 2/08