eKids 553R Series Manual - Página 2

Navegue en línea o descargue pdf Manual para Sistema de karaoke eKids 553R Series. eKids 553R Series 2 páginas. Bluetooth mp3 karaoke with 1 microphone

Imprimir página

Getting Started

There are three ways to listen to music with this unit:

• In USB Mode you can connect a flash drive to the unit and

listen to your stored songs.

• In MP3 Mode you can transfer music from your computer to

the unit via the micro USB Data Transfer port. The music

will save to internal memory and you can listen to it directly

from the unit itself.

• In Bluetooth Mode you can stream music from your

smartphone or other Bluetooth device.

Note: When using USB Mode or Internal Memory Mode, this

unit is compatible with .mp3 and .wav files ONLY.

This unit ships in Demo Mode for in-store demonstration

purposes. Slide the Mode Switch to USB, MP3, or Bluetooth

Mode to exit Demo Mode.

Charging The Unit

1. Connect the included micro USB cord to the micro USB

charging port on the back of the unit.

2. Connect the standard USB plug end of the cord to a power

USB port on a computer or other USB charging device.

For first time use, charge unit for about 5 hours.

Charge via USB AC adaptor, computer USB port, or other powered USB port

USB Adaptor

(not included)

Recharge

when empty

battery icon

flashes

Computer connected

to working outlet

Computer USB port

Using USB Mode

Make sure the Mode Switch is set to USB.

• When the unit is OFF, connect a USB flash drive to the

USB port on the back of the unit.

• Press the Power Button to turn the unit ON. The "USB"

icon will show on the top left of the display.

• When a USB drive is detected, the number of files on the

USB drive will appear on the LCD display.

• Press Play, then use the "Forward" and "Reverse" buttons

to advance through the numbers of files on the USB drive.

• Pressing "Play" will change the display to show a countdown

time of the selected song file. After pressing "Play", the

automatic play-all function will activate, and songs will play

in the order they were stored. Press again to pause.

DISPLAY ICONS

BACK OF UNIT

Bluetooth

Battery

Mode

Level

MP3

Mode

Microphone

USB

ON/OFF

Mode

Bluetooth

Pairing

LCD

Volume Up

Display

Volume

Down

Microphone

On/Echo/Off

Stop

Record/

Pause

Mode Switch

Reset

USB Charging/

Mic

Mic 1

Mic 2

Data Transfer

Volume

Jack

Inside the compartment:

USB port

(for USB Mode)

Reverse

Forward

USING THE MICROPHONE

Power

ON/OFF

Light

Modes

Play/Pause/

• Connect the microphone to

Shuffle

Mic Jack 1 or 2 on the back of

the unit.

• Press the Microphone

On/Echo/Off Button to turn the

Mic ON and amplify your voice

when you sing.

- Press again to add an

'echo effect' to your voice.

- Press again to turn the

Mic OFF.

• Control mic volume using the

rotary dial on the back of the

unit.

Using MP3 Mode

Make sure the Mode Switch is set to MP3 Mode and your

USB flash drive is disconnected from the unit.

Storing Songs:

• Turn the unit ON, connect the micro USB cord to the Data

Transfer port on the back of the unit. Connect the other

end to a USB port on your computer.

• The unit should show up on your PC or Mac as a 'drive' or

'device'.

• Locate your music files on your PC or Mac (typically in

the 'My Music' folder). Note: on some computers, your

music files may be located elsewhere. Check your user

manual for details.

• Select your desired songs ( .mp3 and .wav files are

compatible) and drag them onto the connected drive.

When you are finished transferring files, 'eject' the device

from your computer and disconnect the USB from the unit.

Playing Songs:

• The LCD display on the unit will show the number of

songs stored. (ex: 100 songs would appear as "01:00").

• Use the "Forward"/"Reverse" buttons to navigate tracks.

• After pressing "Play", the automatic play-all function will

activate, and songs will play in the order they were stored.

Using Play/Pause/Shuffle

Press and hold to shuffle songs while playing music in USB

Mode or MP3 Mode. 'SHU on' will flash on the display. Press

and hold to disable shuffle. 'SHU off' will flash on the display.

Using Bluetooth Mode

• Select the "Bluetooth" position on the Mode Switch. The

Bluetooth Mode icon will appear and 'bt' will flash on the

LCD display while in pairing mode. Turn on your

Bluetooth device and enable Bluetooth mode (check in

Options or Settings).

• "BT-553" should appear in your device's Bluetooth menu.

If "Not Connected" or a similar message appears, select

"BT-553" to connect it.

• A voice prompt will confirm once your device is paired.

Put your Bluetooth device in play mode to play audio.

• Use the "Forward" "Reverse" and "Play/Pause" buttons

on the unit to navigate tracks.

• Pairing automatically occurs in Bluetooth mode. Press the

Bluetooth Pairing button on the back of the unit to re-pair.

Recording Audio

(In BT Mode Only)

• Record audio from Blueooth mode and the microphone

input, and the file will save to your USB flash drive.

• Make sure the Mode Switch is in "Bluetooth" position, and

that a flash drive is connected to the USB port.

• When BT audio is playing, press the Record/Pause

Button to start recording audio. Press again to pause

recording, and press Stop to stop recording.

• Switch to USB Mode and select the saved file to listen to

your recording!