Ekinex EK-GD1-DL-4-HV Manual - Página 4

Navegue en línea o descargue pdf Manual para Regulador de intensidad Ekinex EK-GD1-DL-4-HV. Ekinex EK-GD1-DL-4-HV 6 páginas. Dali 2 90-230 vac 4-channels phase cut dimmers

Imprimir página

2. Outputs with common COM pole connection

The terminals indicated by the COM label can be used as

a common terminal for the loads

DALI

90-230 Vac

50-60 Hz

Installation diagram with outputs with

common COM pole connection

Warning! For the EK-GD1-DL-4-HV model, the N

terminals for input must not be connected to the

COM outputs

Configuration change

Power

Subsequently, it is possible to change the device confi-

EK-GD1-DL-4-LV

guration and addressing by using a DALI application for

Dimmer Dali 12/48Vdc 4 canali

DC In: 12-48V

parameterization, which allows you to:

Out: 4x max 5A

• configure the DALI system and define its parameters;

• set the DALI devices (groups, scenarios, IDs, etc.);

• test the communication on the DALI bus;

• update the device.

Note. The programming of the parameters men-

tioned above must be carried out only during the

programming phase. If the customer has a DALI

programmer / master, he can reprogram them as

he wishes.

Dimensions [mm]

Power

EK-GD1-DL-4-HV

Dimmer Dali 90-230V~ 4 canali

Out: 4x 200W