ASTi SOUND+SLEEP SE Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces ASTi SOUND+SLEEP SE. ASTi SOUND+SLEEP SE 12 páginas.
También para ASTi SOUND+SLEEP SE: Manual del usuario (11 páginas)
Imprimir página
Useful Features
Sleep Timer
Using the Sleep Timer is optional. Turning
on the Unit with the Power Button enables
continuous play. The Sleep Timer can be
used to set the Unit to play for a number of
minutes and then shut off gradually and automatically.
The time interval can be set to 30, 60, 90, or 120 minutes.
Turning the Unit Off with the Power Button clears the Sleep Timer.
If the Unit is Off and you press the Timer Button, the Unit will turn On
and the Sleep Timer will be set to 30 minutes. Pressing the Timer
Button again will advance the timer to the next interval.
Headphone Jack
A standard 3.5 mm stereo headphone jack is located on the
bottom of the Connector Panel of the SOUND+SLEEP SE
(headphones not included). Any ordinary set of headphones
may be used. Please note that when the headphones are
plugged in the Unit's speakers are disabled.
CAUTION: Avoid using headphones at high volume levels.
Prolonged exposure may impair hearing.
External Audio Input Jack
When no Audio Cable is plugged in, the Unit is in Internal
Audio Mode. When an Audio Cable is plugged in, the Unit is
in External Audio Mode and can be used to listen to an
external audio source. This allows you to listen to your
Smartphone or any other audio source from any device with
a standard headphone or line-out connector.
The standard 3.5 mm Audio Input Jack is located in the
Connector Panel just above the Headphone Jack. (Audio Cable supplied).
Simply plug one end of the supplied Audio Cable into your audio source, and
the other end into the Audio Input Jack. Adjust the volume to your liking.
When you remove the Audio Cable, the Unit switches back to Internal Audio
Mode and plays the previously selected SoundStory. Please note that all the
volume and other settings are maintained and saved separately for External
Audio Mode and the Internal Audio Modes.
Note: Some phones and other devices may generate noise if they are
simultaneously being charged and used as an external audio source.
CAUTION: It is best to connect the audio source with care: 1) Turn volume
down 2) Connect one end of Audio Cable to sound source 3) Connect other
end of the Audio Cable to the Audio Input Jack 4) Adjust the
SOUND+SLEEP SE volume to the desired listening level.
Connector Panel
6
Timer Button