Astonica 50105076 Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Mobiliario interior Astonica 50105076. Astonica 50105076 2 páginas. Tosca oval table

PARTS & HARDWARE LIST

PART #

DESCRIPTION

Glass Table Top

Table Rim

Connector Ring

Table Leg

Bolt (6x15)

Bolt (6x30)

Flat Washers

Hex Wrench

Bolt Caps

Carefully remove the contents from the package.

If any parts are missing do not attempt to use the product until

they have been obtained and correctly installed.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-424-3354.

Caution: Do not over tighten fasteners.

QUANTITY

ASSEMBLY INSTRUCTIONS

FIGURE 1

1. Unpack all parts and spread them out on a flat, non-scratching surface.

2. Turn Table Rim (B) upside down.

3. Insert the 4 Table Legs (D) into the slots in the edge of the Table Rim (B) Thread a

M6x15mm Bolt (E) and Flat Washer (G) into each Leg (D) to secure them in place.

4. Attach each leg (D) to the Leg Connector Ring (C) with the 8 M6x30mm Bolts (F)

and Flat Washers (G).

5. Turn the table frame assembly right side up onto its legs.

6. Tighten all bolts (F) and (E) securely with the Angled Hex Driver (H)

7. Place plastic bolt caps (I) over each of the bolts (F).

8. Carefully slide the Glass Top (A) into place. The smooth side should be facing up.

Insert the plastic umbrella hole cap into the umbrella hole.