Astonica BASKETWEAVE PATIO TABLE Manual de instrucciones - Página 2
Navegue en línea o descargue pdf Manual de instrucciones para Mobiliario interior Astonica BASKETWEAVE PATIO TABLE. Astonica BASKETWEAVE PATIO TABLE 2 páginas.
Imprimir página
PARTS & HARDWARE LIST
PART #
DESCRIPTION
A
Tabletop
B
Lower Support
C
Legs
D
8 x 30mm Studs
E
8 x 35mm Philip's Screws
F
Flat Washers
G
Hex Nuts
A
C
Carefully remove the contents from the package.
If any parts are missing do not attempt to use the product until
they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Caution: Do not over tighten fasteners.
ASSEMBLY INSTRUCTIONS
1) Place the tabletop (A) upside down
FIGURE 1
on a flat non-scratching surface.
2) (SEE FIGURE 1)
Thread (8) 8mm x 30 studs (D) into
bottom of table top and tighten until
snug.
QUANTITY
B
D
F
E
A
D
D
3) (SEE FIGURE 2)
Position legs (C) over studs
and secure with washers (F)
and hex nuts (G)
1
(leave loose).
1
4
8
8
16
16
4) (SEE FIGURE 3)
Carefully turn table upright.
5) Position lower support (B) over
The tabs on legs (C).
G
6) (SEE FIGURE 4)
Thread (4) 8mm x 35 Philips
screws into lower support and
insert through the leg tabs.
Attach with washers (F) and
hex nuts (G) (leave loose).
7) Tighten tabletop first followed
by lower support.
D
D
FIGURE 2
D
FIGURE 3
B
FIGURE 4
E
F
G
G
F