Astonica 277-1135 Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Fuente al aire libre Astonica 277-1135. Astonica 277-1135 3 páginas. Ducking around garden fountain

Imprimir página

5. (SEE FIGURE 5) Place the electric pump (G)

inside basin securing with suction cups.

Connect the clear tube from duck 1 to the

hole on top of pump. Guide the power cord

plug through the hole on rim of basin,

6. (SEE FIGURE 6) Fill the fountain basin (A)

with water; if possible use distilled water

to fill basin if possible.

7. Plug power cord into properly grounded

120V AC outlet.

Adjust Speed of Water Flow

1. Unplug pump (J) from AC power outlet.

2. Move adjustment switch on pump (G)

toward "+" positive to increase water

flow, or "-" to decrease water flow.

Maintenance

1. Check water level periodically, add

water if necessary.

2. If water is not flowing, check electric pump (G),

and water tube for clogs.

NOTE: Pump may build up calcium after a

long period of time and stop running when

tap water is used. Any calcium remover can

be used to clean pump.

Figure 5

Figure 6

Grounded

Outlets

ELECTRICAL SAFETY INSTRUCTIONS

WARNING!

instructions listed below, may result in electrical shock, fire and/or serious personal injury.

Grounding Instructions

This fountain must be plugged into a 3-wire, 3-prong outlet that is properly working and has

been installed and grounded in accordance with all local, state or federal codes and ordinances.

DANGER:

IMPROPER INSTALLATION OF THE GROUNDING PLUG CAN RESULT IN A RISK OF

ELECTRICAL SHOCK. Check with a qualified electrician or serviceman if the grounding instructions

are not completely understood, or if doubt as to weather the product is properly grounded. Do not

modify the plug provided; if it will not fit the outlet, have a proper outlet installed by a qualified

electrician. Do not use any type of adapter with this product.

Outdoor Use Extension Cords.

1. When product is used outdoors, use only extension cords marked for outdoor use.

2. Use only UL listed extension cords. Never use damaged or altered extension cords.

3. Follow extension cord manufacturer safety instruction.

Extension Cords

1. Make sure your extension cord is in good condition.

2. When using extension cords, be sure to use one heavy enough to carry the current your product

requires. An undersized cord will cause a drop in line voltage resulting in power loss and

overheating. Reference Table 1 at the bottom of the page for the correct size to use depending

on cord length and nameplate Ampere rating. If in doubt, use the next heavier gage. The smaller

the gage number, the heavier the cord.

Table 1. Minimum Recommended Extension Cord Gauge (AWG) Chart

ELECTRICAL SHOCK. Read and understand all instructions. Failure to follow all

SAVE THESE INSTRUCTIONS.

AMP Load

Volts Extension Cord Length

120V

25'

50'

100'

AWG

1-5

6-10

10-12

12-16

Not recommended

150'