Ameristep GRIZZLY 51016 Manual de instrucciones y seguridad - Página 4

Navegue en línea o descargue pdf Manual de instrucciones y seguridad para Accesorios para cámaras Ameristep GRIZZLY 51016. Ameristep GRIZZLY 51016 16 páginas. Grizzly series

Imprimir página

C H O O S I N G A S A F E T R E E

• ALWAYS thoroughly inspect the tree before installing your product. DO NOT install your TREE/LADDER STAND onto any dead or unsafe tree, telephone

or utility pole, structural column, or man-made structure. Doing so may result in serious injury or death.

• ALWAYS select the proper tree for use with your TREE/LADDER STAND. Select a live straight tree that fits within size limits recommended (minimum

tree diameter must be no less than 9 inches and maximum of 18 inches.). DO NOT rely on a branch for support.

• DO NOT select a tree in the dark or choose a tree in close proximity to a fence. You must not have any stumps or rocks beneath your tree.

• NEVER use TREE/LADDER STAND on a tree that is dead, diseased , leaning or on wet and uneven ground as the tree may fall, break or uproot.

• Your tree must not be wet, icy or slippery or on wet, swampy, or loose ground that allows the tree to be unstable. Check the ground under TREE/LADDER STAND

to ensure it is firm and level.

• Be sure you have a level stand platform. Your tree must not lean or have any irregular shape.

• Tree must not have any loose or scaly bark or excessive vines, nails, screws, or any other sharp objects protruding that may sever webbing on product.

Any surrounding trees must not lean or have dead limbs that may fall onto you or your product.

• NEVER HURRY!! While climbing a TREE/LADDER STAND, make slow, even movements no more that ten to twelve inches at a time. Make sure you have

proper contact with tree and/or TREE/LADDER STAND every time you move. On ladder tree stand, ALWAYS maintain three points of contact with each

step and ALWAYS lean forward as you climb.

P R O P E R C A R E A N D M A I N T E N A N C E :

• Inspect for defects (damage, rot, corrosion, cracks, freezing, excessive heat, etc.) before every use is required. Do not use if damage is detected or

suspected.

• Ameristep recommends periodically re-tightening and/or replacing hardware (supplied by Ameristep), including bolts, nuts, washers, rope, straps,

cord, etc.

Customer Service Department 1-866-972-6168