Acer XV340CK Manual del usuario - Página 23
Navegue en línea o descargue pdf Manual del usuario para Monitor Acer XV340CK. Acer XV340CK 30 páginas.
También para Acer XV340CK: Manual del usuario (5 páginas), Manual del usuario (29 páginas)
Imprimir página
Adjusting the picture quality
Picture
Brightness
Color
Contrast
Audio
Black Boost
Gaming
Blue Light
OSD
ACM
System
HDR
Super Sharpness
Information
1. Press the
key to bring up the OSD.
2. Using the / keys, select
picture element you wish to adjust.
3. Use the / keys to adjust the sliding scales.
4. The Picture menu can be used to adjust the current Brightness, Contrast, Black Boost,
BlueLight, ACM, HDR, Super Sharpness qualities.
5. Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Adjusts the balance between light and dark shades.
6. Contrast: Adjust the contrast from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Sets the degree of difference between light and dark areas.
7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
8. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light
is shown -- 80%, 70%, 60%, or 50%.
-----------------------------------------------------------------------------------------------------------
Note: A higher value allows more blue light to pass through, so in order to
achieve the best protection, please select a lower value, of which 50% is in the
best state and has been tested by TÜV Rheinland and meet the requirements of
TÜV Rheinland's "Low Blue Light Content" standard.
9. ACM: Turn ACM on or off.
Note: Set to "On", will be based on the current screen to dynamic contrast adjustment.
10. HDR: Turn HDR on or Auto.
-----------------------------------------------------------------------------------------------------------
Note: When HDR function is turned Auto, if our system detect HDR signal,
HDR function will start automatically. In information page will show current
signal mode, "HDR"/"SDR".
During HDR function working, system will automatically set some default color
setting value. In this period. ACM/Gamma/Contrast/ sRGB /BlueLight/Color
Temp/6-axis, user cannot adjustment. User only can adjust Brightness, Super
Sharpness.
11. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology can
simulate high-resolution images by boosting the pixel density of the original source to
make images sharper and clearer.
Mode - Standard
Off
Off
Off
Off
Picture from the OSD menu. Then navigate to the
70
Picture
Color
50
Audio
5
Gaming
OSD
System
Information
12
Mode - Standard
Brightness
Contrast
Black Boost
Off
Blue Light
Off
ACM
Off
HDR
Off
Super Sharpness
70
50
5