Astralpool 28556 Manual de instalación y mantenimiento - Página 2
Navegue en línea o descargue pdf Manual de instalación y mantenimiento para Equipos de iluminación Astralpool 28556. Astralpool 28556 10 páginas. Antivortex lid
Imprimir página
ENGLISH
ANTIVORTEX COVER MANUAL
1. GENERAL INFORMATION
- This antivortex cover is specialy designed to pool and pool-ground clea-
ners. The dimensions and geometry of this model permits the cleaner to
make easily the clean's program.
- Flat gradient and a total height of 70 mm to pool's ground, what permits
the cleaners to surpass without problems.
- Lateral filtration surface.
- This antivortex cover are manufactured in fiber glass + polyester; with an
excellent gelcoat external finish. It also incorporates stainless steel screws
AISI 304 and poliamide supports to evite any oxide possible problem.
- This anti-vortex cover is designed following pool user's security european EN
1345-1:2000 standards (edges and corners radiused with radius bigger than
3 mm, entrapment elements and holes smaller than 8 mm, suction speed
lower than 0,5 m/s).
2. INSTALLATION
- It's very important to verify A and B dimensions (see the graphic under the
text) to make sure that the cover follows user's security european standard
EN 1345:-1:2000. If we modify one of the dimensions it will incrase water
speed in the other suction points and also somebody could be attraped if
one of the spaces between the two pieces is more than 8 mm.