DoorHan SECTIONAL-800PRO-CE Manual de instalación y funcionamiento - Página 4
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Abrepuertas DoorHan SECTIONAL-800PRO-CE. DoorHan SECTIONAL-800PRO-CE 20 páginas.
Imprimir página
non-EU countries these measures are to be observed for ensuring the normal safety level.
• The mechanical door assembly units must conform to the provisions of the standards EN 12604 and EN 12605.
• Before installing the operator, make sure the mounting location corresponds to the operator's specifications by its climatic
conditions.
• You should not install the equipment in rooms with highly flammable substances or other hazardous media, as this can
result in explosion or fire.
• You should use tools indicated in Section «Tools» of the given manual during assembly, installation and adjustment of the
operator.
• You should use a stable support when working at height.
• You should use hand and face protection when drilling holes.
• You should use fasteners from the operator package or other suitable fasteners to securely mount the operator.
• You should power off when performing installation, cleaning or maintenance of the operator.
• When mounting the operator on a door with a pass door, it is necessary to install an additional safety device, which
prevents the operator activation, when the door is open.
• Make sure, that there will not be trapping of articles between movable and fixed elements of the operator when the door
moves.
• You should use additional DoorHan accessories, since the accessories of third party manufacturers can damage the
automatic system.
• DoorHan is not liable for unstable work of the automatic system, if you use safety devices and accessories, produced by
other manufacturers without securing approval of DoorHan.
• You should not leave the electric motor released. This can lead to uncontrolled movement of the door and, as a result, to
its damage.
• You should not use the operator, if it is necessary to repair or to adjust the equipment, since defects during the assembly
of the operator or incorrectly installed door can result in injury.
• DoorHan is not liable, if the product is not correctly installed or is damaged during operation.
• Make sure, that there are no foreign objects within the operating range of the electric operator before its start.
• You should not introduce changes, not stated in the given Manual, into the automatic system.
• You should remove the product package and dispose of it. You should not leave the packaging materials within the reach
of children.
• You should not allow children to play in the door movement area during the operator operation. All remote control panels
and stationary control buttons must be absolutely inaccessible for possible use by children.
• When installing the operator on the door facing public areas, it is required to install safety devices (photocells).
• Repair of the operator can only be carried out by specialized organizations certified by the manufacturer.
• Do not repair the operator by yourself.
• Every six months it is necessary to check the safety of the operator and the balance of the door in accordance with the
standards EN 12604 and EN 12605 in the current version. In the event of a malfunction, stop using the door and call the
service engineer immediately.
• Record the results of the operator safety test and door balance test in the check log.
• It is allowed to drive in and to pass only when the door does not move and the operator is switched off.
• The contents of the Manual could not serve as a basis for laying claims of any kind.
• The manufacturer reserves the right to introduce modifications into the structure and to improve it without prior notice.
4
SAFETY INSTRUCTIONS