Astralpool HALO HUB Manual de instalación - Página 9
Navegue en línea o descargue pdf Manual de instalación para Equipos de iluminación Astralpool HALO HUB. Astralpool HALO HUB 12 páginas. Automation expansion module
Imprimir página
HALO
®
HUB
™
Installation Manual
Relay 1 can be configured to give a "Momentary" pulse
(in which case it can't use timers) or to provide an on/
off action. See Appendix 2 for more information.
4.3
Unpairing from a Halo Chlor
Connected devices are shown in the "Connected
Devices" list and have a "Settings" Icon on the RHS of
the button.
Press the button of such a connected device to display
a window that allows you to delete, edit, or replace
the connected device.
If you no longer require a device in the system, use the
"Delete" button to delete it.
If you wish to replace a connected device with a newer
one, use the "Replace" button. If "Replace" is selected
then the settings of the old device will be used for the
new device. If you delete a device and then choose to
reinstall it, you will need to configure the new device.
Section 5. Control using the Halo
Chlor
5.1
Manual Control
All of the functions of the Halo Hub can be controlled
using the icons in the top ribbon of the Halo Chlor
display. (Icons will only appear in the top ribbon if
appropriate devices have been configured.)
Press the icons, lights, heater, solar etc., to control
these devices manually.
Other functions such as cleaning pumps, blowers, etc.,
can be controlled using the "Others" icon in the top
ribbon of the display.
5.2
Timer Control
Timer control is accessed by pressing the "TIMERS"
icon in the top ribbon of the Halo Chlor display.
There are two groups of timers available: equipment
and lighting. The duration of each timer is shown
graphically on the right hand side of the screen.
1.
Press the "Equipment" or "Lighting" timers button
to display the available timers.
2.
Press the timer you wish to adjust.
3.
When the timer is opened up you can adjust the
time period, select other equipment to control
etc by pressing on the appropriate button (or
sliding the appropriate slider).
NOTE: Refer to the Halo Chlor manual for more detailed
information.
9