Dabir Surfaces DabirAIR Manual de instalación

Navegue en línea o descargue pdf Manual de instalación para Soporte para TV Dabir Surfaces DabirAIR. Dabir Surfaces DabirAIR 2 páginas. Accessory bracket

Imprimir página

Accessory Bracket Installation Guide

Important Before You Start

Please read the "Instructions-for-Use" device manual carefully and completely before using Dabir products.

Failure to do so may result in decreased performance or product failure. See Dabir Instructions for Use

(DOC# R01-0006-00004) for system operation.

DabirAIR® Accessories: Assembly Steps (Example: Bed Rail Bracket - Other mounting brackets may

apply)

1. To prevent product damage, prepare your work table area by covering it with a protective cloth or mat.

2. Identify key components and features of the device prior to assembly.

Controller

Bracket

Cap Screws

3. Firmly locate the Bracket hook into the

Controller receiving pocket on the underside of the

Controller. (Proper locating is critical for Step 4.)

4. Hand adjust bracket position such that the

threaded inserts and bracket holes align.

5. Insert the two threaded fasteners and tighten.

(DO NOT OVERTIGHTEN)

6. The bracket assembly is now complete.

NOTES:

Follow these same assembly steps for

other DabirAIR mounting accessories.

(Assembly tool and screws included.)

Electronic copy available at www.dabir-surfaces.com/IFU

Threaded Inserts

Step 3

Controller receiving pocket

(Bottom side of Controller shown)

Bracket Hook

Steps 4 & 5

Align and install

Threaded Fasteners

Finished

Assembly

DOC# R01-0006-00190-EA