Canon PIXMA MP610 Series Manual de servicio - Página 9

Navegue en línea o descargue pdf Manual de servicio para Impresora todo en uno Canon PIXMA MP610 Series. Canon PIXMA MP610 Series 45 páginas. All-in-one photo inkjet printer
También para Canon PIXMA MP610 Series: Empieza aquí (2 páginas), Manual complementario (6 páginas), Folleto y especificaciones (2 páginas), Manual de inicio rápido (40 páginas), Manual de inicio rápido (2 páginas)

Canon PIXMA MP610 Series Manual de servicio
19 times
Ink tank position sensor
error
22 times
Scanner home position
error
Power LED
ROM / RAM error
turned off, and
Alarm LED lit
Before replacement of the logic board ass'y, check the ink absorber counter value (by service test print or
EEPROM information print). If the counter value is 7% or more, also replace the ink absorber kit when
replacing the logic board ass'y. If the counter value is less than 7%, register the current ink absorber counter
value to the replaced new logic board instead.
[See 3-3. Adjustment / Settings, (6) Service mode, for details.]

2-3. Other Error Messages

Message on the LCD
The selected paper cannot be fed from
cassette. Change the paper source and
press [OK].
Cannot specify the followings
together. Change one of the settings.
Device memory is full. Reduce the
amount of photos, films, copies to
scan.
Press <>.
(<>: Color button icon)
Press <>.
(<>: Black button icon)
There are no photos in memory card.
The value exceeds the number of
copies you can print.
Memory card is not set. Insert the card
after checking the direction.
DPOF information is not saved in the
memory card.
The number of copies to print is not
set. Input the number of copies.
[6502] None of the ink tank position is detected. - Platen unit
[5010] The scanner unit cannot detect the home
position, or the scanner unit warming-up
is not performed properly at power-on.
On the LCD, "Scanner is not operating
correctly." is displayed.
---
The check sum value is incorrect in the
ROM check or RAM check at hard-
power-on.
Cause
The paper type being used (business card,
Credit Card size paper, or stickers, etc.) is
not supported for paper feeding from the
cassette.
Settings made conflict each other. (e.g.
Selecting borderless printing on plain paper)
The memory is not sufficient to do the print
job in copying.
The Black button was pressed, but it is
invalid.
The Color button was pressed, but it is
invalid.
Supported image files are not in the memory
card.
During selecting images or specifying the
number of copies, the total print quantity
exceeds the prescribed value of 999.
The memory card is not inserted in the slot
properly.
DPOF print was selected in the menu, but no
DPOF files are contained in the memory
card.
Printing was attempted with the print
quantity left "0" (zero).
7 / 43
- Timing slit disk eject film
- Paper feed motor
- Logic board
- Logic board
- Scanner unit
- Logic board
Solution
Change the paper source to the rear tray.
Change the settings so that they will not
conflict each other.
Reduce the amount of data to be printed, or
print from a computer.
A temporary error. Press the Color button to
continue the operation.
A temporary error. Press the Black button to
continue the operation.
A temporary error.
- Confirm that supported image files are in
the memory card.
- Images with double-byte characters used in
the file name (or folder name) may not be
recognized. Change the file (or folder)
name so that it contains only single-byte
alphanumeric characters.
- If images are edited on the computer, print
them from the computer.
A temporary error. The last operation before
the error is cancelled, and the total print
quantity returns to the value before the error.
Set a memory card.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
A temporary error. Specify the print
quantity.